Installation – Florida Tile

Installation Questions

Please email Tile Council of America if you have a technical question related to the underlayment, use of setting materials, or other installation related question. You can reach them at techinfo@tile-usa.com or you can view the TCNA Installation Handbook at http://www.tileusa.com/publication_main.htm

Before tile installation begins, the installer is responsible for checking the tile for obvious visual defects. Cartons and pallets of tile must be blended to achieve an aesthetic blend. No claims will be accepted after installations which have obvious visual defective tile. Substrate surfaces shall not show variations in excess of:

Comply with applicable parts of ANSI A-108 Series for ceramic tile installation. Extend tile work into recesses, and under and behind equipment and fixtures except where otherwise shown. Fit tile to electrical outlets, piping, fixtures and other penetrations so that plates, collars or covers overlap tile. Joints shall align vertically and horizontally between trim and field tile. Grout tile to comply with reference installation standards using grout materials indicated.

Leave finished installation free of cracked, chipped, broken, unbonded or otherwise defective tile work. Protect all floor tile installations with kraft paper or other heavy covering during construction period to prevent staining or damage. No foot or wheel traffic permitted on floor for at least 7 days after grouting. Due to inherent size variation in porcelain and ceramic floor tiles, a grout joint must be used. Your installer will be able to recommend a suitable grout joint for the product youve selected.

See the rest here:
Installation - Florida Tile