Home Builder Developer - Interior Renovation and Design

As wearing masks remains the new normal, why not have the best technology and filtration available, ... [+] even if it is not obvious, as in the versatile Buff Filter Tube.

Face masks, along with hand washing and social distancing, are the best safety protection you have against the coronavirus and risk of contracting COVID-19 in the current pandemic. Wearing a mask also protects the rest of society. The World Health Organization (WHO) puts it bluntly: People wearing masks are protected from getting infected. Masks also prevent onward transmission when worn by a person who is infected, whether they have symptoms or not.

Masks work, the science has shown it, anecdotal evidence is overwhelming, and countries and regions that have higher level of mask usage have had lower infection rates across the board (and vice versa). Just about every documented super spreader event has revolved around failure to wear masks, while potentially disastrous situations like the Missouri hair salon turned out fine because of masks. Consider flying: everyone on planes has to be masked, and infections linked to air travel have remained impressively low after millions of passengers traveled.

The Centers For Disease Control (CDC) just released new guidance on public transportation, stations and airports and its conclusion is a strong recommendation for wearing of masks by passengers. Comments by the CDC include Appropriately worn masks reduce the spread of COVID-19 and Masks are most likely to reduce the spread of COVID-19 when they are widely used by people in public settings, and Broad and routine utilization of masks on our transportation systems will protect Americans. The WHO also stresses masks above most other measures in its latest COVID-19 advice for the public (October 13): Masks are a key measure to suppress the spread of COVID-19 and save lives, and Make wearing a mask a normal part of being around other people, and simply Wear a mask.

Some people have heard the rumor that wearing masks can lead to CO2 intoxication but according to the WHO thats just fake science, FACT: The prolonged use of medical masks when properly worn, DOES NOT cause CO2 intoxication nor oxygen deficiency. You can dislike wearing masks, I think most people do, or you can mistake it for a political issue, but it simply makes no sense to argue with the beneficial results.

In any case, like it or not, it looks like masks are here to stay for the foreseeable future, mandated in most states for shopping and other indoor gatherings, mandated by many municipalities, companies and retailers, as well as on planes. But not all masks are equally effective, and since you are likely going to be wearing one somewhat regularly for the immediate future, you might as well have one that works well.

Back in August I took a look at the masks being produced by the top specialty companies in the outdoor gear and fitness fields, based on the simple premise that their expertise with higher tech performance fabrics, precision fit and manufacturing, and features like comfort and breathability lent their skill set to mask making. Ive continued to use every one of the masks I featured in that piece, and all are still on the market and great choices, with several, including the two models from Kitsbow and the one from Outdoor Research among my personal favorites. But now there even are more options with some added benefits.

Having done a lot of research and having worn masks for long durations during flights for work, during a variety outdoor sports from cycling to hiking, and in hospitals, stores and homes, Ive narrowed down the key differentiators that elevate some masks about others. The first is filtration. All the masks worn by medical workers, from the standard blue or green pleated rectangle to the highly fitted N95 are basically wearable filters with no fabric at all, and that is why they work well. Bandanas and DIY masks made out of t-shirts or pillowcases, or the store-bought simple cloth equivalents, are still far better than nothing, but they are not true filters. So, personally at this point I use only masks with filters, I see no reason not too, and these have become widely available.

When placed in between the layers - such as with a pocket style opening allowing for insertion and removal - you could insert a filter which will make the mask more effective and provide extra protection against allowing viral particles into the air when you talk, cough or breathe, Dr. Ruth L. Bush, associate dean of medical education and a professor at the University of Houston College of Medicine, told TODAY.com. Research has shown that some loosely-woven masks only block 10-20% of particles, but by adding one or more layers of filter material, higher percentages of particles could be blocked.

There are three basic ways you can get high quality filtration in a face mask. One is to go the disposable route like the doctors do. The problem here is a lot of cost over time, a lot of waste, and dubious manufacturing for consumer models. For example, while the KN95 masks many consumers are buying (mostly online) as an alternative to the medical grade N95 versions (which are still in short supply for front line workers) work in theory, in practice many are made in China, infamous for mislabeling and safety shortcuts in manufacturing, and recent studies have shown that the majority simply do not functional as advertised. The most recent major study showed that 60-70% of imported KN95 masks do not filter 95% of aerosol particulates as they are supposed to.

The second but least common strategy is a mask with a permanent filter layer built into it, like the Kitsbow Wake ProTech model, developed by a North Carolina based cycling apparel specialist in partnership with medical professionals at Wake Forest. In general, double or triple layer masks are more effective than a single layer, but this model has four-layer construction, including two internal permanent filtering layers. This no fuss, no muss model is washable, comfortable, comes in several sizes with great coverage and easily adjustable around the head straps, and it is made domestically.

But the most common solution is a fabric mask with a pocket for a disposable paper style filter, some of which are single use and others reusable a certain number of times. Either way, the drawback is that you have to buy and keep extra filters on hand, but these tend to be the most comfortable and breathable solutions, and the disposable filters are highly effective, with many rated at around 99%. These also give you the flexibility to skip the filter when wearing in low risk uses such as a fitness walk around your mostly empty neighborhood to avoid burning through filters.

In addition to some sort of filter, the key elements I look at are fit and comfort, which often go hand in hand. The tailored, more volcano shaped masks that have a pointy top center designed to go around your nose tend to fit more closely and slip less than the basic rectangular models. In fact, while health authorities have made it abundantly clear that masks only work if they fully cover your nose and mouth, Ive already had several distressingly stressful encounters with cashiers or people in airports who have their mask dropping off their nose as we interact, and these have in every case been basic rectangles. Additional features that give you a closer fit (better seal) include an adjustable, bendable nosepiece, multiple sizes, and adjustable ear or head bands.

Finally, more and more better-quality masks are featuring antimicrobial coatings to keep them clean from your own hands, especially on the outside when you pull them up and down and touch them in between hand washing.

Many of the masks Ive tested recently have most or all of these features at affordable prices, combining comfort, breathability and protection. Here are my favorite new additions:

Long before the coronavirus pandemic, HALO used proprietary New Zealand based filtration technology ... [+] to protect users form air pollution and natural disasters.

HALOmask: Long before COVID, people in many parts of the world faced danger from the air they breathed, and the trademarked technology of the HALOmask was conceived in New Zealand more than four years ago, deployed on the streets of Bali when volcanoes erupted in Indonesia, and in Australia when wildfires ravaged the countryside. Maker HALOLIFE uses a proprietary nano filter material made in New Zealand - not China - that has been independently laboratory tested and shown to block harmful airborne particulates, including smoke, dust, exhaust fumes, toxins, odors, pollens, pathogens and pollutant, capturing a remarkable 99.37% at 0.1 microns, which is about as good as filters get.

But there are several other key benefits: an ultra-breathable honeycomb outer layer, durable foam nose pads to optimize fit and prevent glasses from fogging, adjustable ear loops with a toggle lock on each one, and a soft, comfortable lining of natural bamboo fabric. The sleek design provides an excellent seal on almost every face, and the ultra-thin filter combines maximum breathability and protection. The replaceable filter can be used for up to 200 hours and the HALOmask comes in sizes small through extra-large in order to fit adults and children as young as seven. It is offered in black, white, or two-tone sport mesh with grey trim ($30 with one filter).

Masks with high efficiency filters are desirable, but often cumbersome. The r mask has a better ... [+] perfectly fitted, user friendly solution

r Nanofilter Masks: Based in Prague, r takes a similar approach, using a disposable EU-made three-layer nano filter insert, which blocks up to 99.8% of particulates. In addition, the exterior is treated with Swedish made ViralOff, an antimicrobial treatment that reduces 99% of viruses on the surface within two hours. The front is also treated with Eco Aqua Zero, which makes the exterior water repellent and causes water to bead up and roll off, and while many mask buyers dont consider what it is like to wear one in the rain, you may have to at some point. The masks are light and comfortable, with a locking toggle on each ear loop for perfect fit.

Its important to note that r makes two versions, with and without an external exhalation valve. In general masks with valves have been not recommended (including by the WHO) because they allow users to expel unfiltered air which is dangerous to others, but unlike most competitors, the exhalation valve is entirely in front of the filter meaning that exhalation is still filtered but is supposed to be easier. However, while these are popular in Europe, when I flew recently on American Airlines, they had a policy of not allowing masks with valves, and the r models I have been testing are the valve-less ones.

The r mask has all the bells and whistles: filter, anti-microbial coating, high breathability and ... [+] adjustable ear loops

But my favorite thing about the r masks that sets them apart from similar high tech models is that the filter is a single fitted piece the same shape as the mask itself, attaching to the inside panel via three hook and loop strips, rather than the pocket just about everyone else uses. On many masks, inserting the filter evenly and without crumpling it up is a tedious process, but this one fits perfectly and securely every time with virtually no effort. In addition, the filter itself has an embedded aluminum strip in the nosepiece to match the perfect close fit of the mask, and the disposable filters can be used for up to two weeks. The r masks come in three sizes and seven color schemes but all are black, only the logo size and color changes ($30).

Ideal for hiking or running, the Buff Filter Tube combines the ease and comfort of a neck gaiter ... [+] with high efficiency filtration

Buff Filter Tube: This is by far the best option Ive seen for frequent on and off use, such as hiking when you pull up the mask only when you pass people the trail.

Neck gaiters as a category of masks got slammed by a widely publicized study calming the were worse than wearing nothing, which defied logic so much it should have given researchers a red flag. Since then the New York Times, Slate, Popular Since and many others have reported how the testing was flawed, but to me the bigger issue was that the researchers seemed to believe that a neck gaiter is a single consistent thing like a cotton bandana. In fact, neck gaiters cone in all thicknesses and materials, from synthetics to cotton to wool and some are literally hundreds of times thicker than others. It sounds like the one they tested was the lowest denominator, the promotional giveaway style.

On the other hand, Spanish manufacturer Buff pioneered the tubular multi-function headwear category for active outdoor use, and when the coronavirus surged throughout Europe early in the year, before it was as much of an issue here, Buffs brand teams felt the coming global impact at its headquarters in Spain. As employees were sent home for safety precautions and production paused, brainstorming ways to provide aid began. That's when the new corporate alliance with UNICEF and the new Buff Filter Mask were launched, with 2% of global revenues, including all sales from the new masks, to be donated to UNICEF next year. I covered this in my last story.

Now Buff has a newer product, the Filter Tube and while the mask is a highly fitted, strap-on mask, the filter tube is basically a classic Buff neck gaiter with a pocket that holds a disposable filter. The 3-layer filter uses melt-blown nano fiber, quickly becoming the top material choice, claiming 98% effectiveness, and the interior of the filter pocket is treated with Swiss HeiQ V-Block antimicrobial treatment. It also adds in UPF 50+ sun protection, and is wicking and quick drying. Basically, it can give you filtered mask protection while keeping the sun off you or keeping you warmer during a range of outdoor activities. Since most ski resorts are requiring masks for lifts and lift lines this season, and Buff is already a popular skier and snowboarder choice, this seems perfect for winter.

Besides myself, the only people I could find who have used and reviewed the filter tube were the truly obsessive gear junkies at running website roadtrailrun.com who wrote, We tested the Buff Filter Tube on a hike with 2400 feet of climbing in 3 miles to Lake Blanche in Utah.The trail was busy and narrow so masking was frequently required. Not only is the Buff with filter comfortable enough to remain on at all times under exertion but the ability to carefully and quickly (unlike masks) pull it up and down is very convenient when passing people on the trail. Of the masks tested it is clearly the most practical for runners while providing, when used and handled properly and instructions are included, a high level of filtration protection. Because of the four way stretch and generally comprehensive, form fitting nature, it only comes in two unisex sizes which cover pretty much everyone, and a whopping fourteen colors and patterns. Each filter tube includes five single use filters ($27-$29).

The Better Mask by Inex Gear has an integrated nano filter that does not need to be replaced.

Inex Better Mask: Los Angeles-based Inex Gear just launched The Better Mask as a stylish and high-tech protective option. It was designed in collaboration with Academy Award nominated costume designer Luis Sequeira (The Shape Of Water), and features a deep scalloped nose bridge so you can more easily see the wearers expression, and it comes in three sizes (suitable for kids 5 years and older) and four colors.

But while one of the key selling points is looking good, it is also packed with features. The chin cup makes for a tight seal, and it has an embedded nanofiber filter that spans the entire mask and is washable and reusable for daily wear - without having to remove or replace the filter. The nanofiber is sourced in Europe from a manufacturer that states it is 98% effective and the mask has been treated with Swiss HeiQ V-Block antimicrobial technology. Like the other (non-gaiter) masks here it has locking toggles on each ear loop for a highly adjustable, secure and comfortable fit ($33).

Read more from the original source:
Face Masks With The Best Filters, Features And Technology For Your Pandemic Safety - Forbes

Infusing your own cannabis oil is a stoner rite of passage, though made obsolete by recreational legalization. Pre-internet, the tradition nearly always necessitated a trusted stoner guide or, at least, a dubious counterculture cookbook. Post internet, the process became marginally easier with technological sharing of techniques and recipes. After adult-use legalization, however, this heritage craft has been aggrandized to commodity levels, resulting in dispensary shelves packed with all kinds of medicated edible delights.

But the bottom line remains; for those who still pursue the heritage craft of extracting cannabinoids, terpenes, and essential oils from fresh weed, the process is time consuming, complex, and enormously stanky.

The LEVO II countertop oil extractor has compartmentalized the most challenging aspects of at-home extraction most remarkably the processes of drying and decarboxylation all in a countertop device as inconspicuous as a Kitchen Aid mixer or an oversized cookie jar. And while it doesn't completely erase the persistent stank of slow-roasted weed, it is self-contained enough to significantly decrease overall cannabis vapors.

The LEVO II is a countertop oil infusion machine. Its compact design takes up about as much shelf real estate as a family-sized rice cooker, and it's available in a range of contemporary colors. A LEVO II can hold about a quarter ounce of crushed herbs, and can produce up to 19 ounces, or just over 2 cups, of infused oil. While the LEVO II can be used with any kitchen herb your culinary heart desires, it's enormous popularity with the cannabis community has given it quite the reputation as a cannabis oil extractor.

The LEVO II can dehydrate fresh botanicals, but perhaps the most remarkable feature of this kitchen appliance is how effectively it activates dried herbs activation being shorthand for decarboxylation, the process in which the cannabinoids are heat-activated.

Original LEVOs were a bit smaller, did not feature activation cycles, and seemed more functional for culinary or skincare endeavors. The LEVO II however, is firmly geared toward cannabis extractors.

Once your LEVO II is removed from the box, you will notice a large sticker on its face prompting a download of the LEVO II smartphone app, which will then trigger the LEVO II's Bluetooth, connecting the machine to your smart device. The machine can be controlled almost entirely by the app, but if you're more the hands-on type, the machine's interface is uncomplicated and easy to understand.

The LEVO II is sleek and modular, with a lid that pops open with a gentle push, revealing a ceramic reservoir, a stainless steel infusion pod with a silicone mat and lid, and a small silicone stirrer that looks a bit like a spiky miniature hockey puck. The components are all easily removable from the machine, and easily replaced after cleaning.

The operational interface is comprised of: a small LED screen that displays verbal prompts throughout the process, one button that triggers drying, activation, and infusion cycles, buttons for controlling temperature and time, a button that unlocks the lid mid-cycle, a start/stop button and, lastly, a button that dispenses the oil once it's been infused. Turn it on, choose your cycle, adjust your temperature and time, and you're ready to start the infusion process.

The app is not necessary to operate the LEVO II, but it does offer a nice bit of assistance, delivering value in its calculations of temperatures and cook times based on a database of usable oils and botanicals. Choose from a concise list of common herbs and oils and the app will provide the correct temp and cook time. Once your LEVO II is turned on and connected to your smartphone, users can then control the LEVO II from their device. When doing your first extraction, however, we suggest operating from the machine's interface and using the app for reference. This may save you confusion later in the process.

The app also features blog posts explaining things like why activation is critical and how to make a vegan pesto pizza in case you're up for light reading while your herbs infuse.

Before using the LEVO II in any way, it is important to rinse all of the removable components.

Note: Had we used a more sticky-icky variety of cannabis, the 3-hour, 115 degrees F drying cycle would have been our critical step one, but as our weed was already dry and crumbly, we went straight to the second step: activation. For our testing purposes, we infused an eighth of cannabis. The activation cycle took 30 minutes at 240 degrees F. Only the faintest perfume of cannabis escaped the machine during the activation process, and a soft chime announced the completion of the cycle.

Tip: Chrissy Bellman, the founder of LEVO II suggests visiting jeffthe420chefcalculator.com to get an approximation of your doses based on the cannabinoid percentage, amount of weed used, and the amount of oil being infused.

The LEVO II's components are all easily removable for cleaning. Each is also dishwasher safe.

Bonus: if any oil is spilled in the housing, it can be wiped up fairly easily. The exterior is also easily wiped clean with a cloth. The power cord even has its own compartment once the LEVO II is powered down. The general simplicity of the machine and its parts make cleaning relatively effortless, which is pretty remarkable considering how messy, stanky, and greasy the undertaking of herbal infusions has been historically.

Infusing one's own cannabis oils gives a person complete control over dosing, strain specificity, carrier oils and intensity, and LEVO II goes a step further by enabling users to create uncommonly small batches. For example, a LEVO II can be used to transform an otherwise caustic pre-roll into butter for a half dozen medicated cookies, or to create a tailored infusion medley for a couple days worth of topical use, or to make a really, really good rosemary/OG Kush salad dressing.

At $249, LEVO II's most practical value is in how greatly it has simplified the art of herbal infusions. And though the LEVO II is built to work with countless botanicals, a significant swath of its users are likely more interested in strain-specific, cannabis infusions with calibrated dosages than parsley-sage-chrysanthemum EVOO recipes though, admittedly, the crossover is probably pretty broad.

Bottom line: whether you're infusing your favorite cannabis strains or your best loved kitchen herbs, a tool that eliminates all the most disagreeably messy aspects of marrying herbs and oils is hard not to appreciate.

All photos courtesy of LEVO.

More:
Everything you need to know about the LEVO II countertop oil infuser - Weedmaps News

The study of Luxury Countertops Market may be a compilation of the market of Luxury Countertops lessened into its totality on the idea of sorts, application, trends and opportunities, mergers and acquisitions, drivers and restraints and a world reaching. The careful study additionally offers a board interpretation of the Luxury Countertops industry from a range of information points that area unit collected through reputable and verified sources. moreover, the study sheds a lights on a market interpretations on a world scale that is more distributed through distribution channels, generated incomes sources and a marginalized market area wherever most industry happens.

Access Free Sample Copy of Luxury Countertops Market Report 2020: https://calibreresearch.com/report/covid19-impact-luxury-countertops-market-27899#request-sample

The Global and United States Luxury Countertops market research report provides a whole outlook on the challenges existing among the business and in addition discusses the rising threats, constraints and limitations. The report is associate fact-finding study that has associate degree full breakdown of the market dynamics like drivers, growth prospects, product portfolio, technological advancements associate degreed an full analysis of the key competitors of the market. The worldwide Luxury Countertops market is any segmental into kinds, applications, technology, end-users, business verticals and key geographies across the earth. whats additional, the report offers a forecast estimation of the valuation of the Luxury Countertops market 2020-2026.

NOTE: Our reports include the analysis of the impact of COVID-19 on this industry. Our new sample is updated which correspond in new report showing impact of Covid-19 on Industry trends. Also we are offering 20% discount

Major Market Manufacturers indulged in this report are:

ArboriteAKPAristech SurfacesArmas CompanyArpa IndustrialeCAMBRIAWilsonartLOTTE ADVANCEDCaesarstoneFormicaCosentino SAGranito ZucchiGroupe PierredeplanHanwhaCXUNGelandi

Luxury Countertops Market 2020 segments by product types:

LaminatesEngineered StoneNatural stoneOther materials

The Application of Global and United States Luxury Countertops Market 2020-2026 as follows:

ResidentialCommercial

The report presents associate degree full study of the Luxury Countertops business through data gathered by thorough primary and secondary analysis. The data developed is verified and valid by business specialists and professionals. Additionally, the report utilizes advanced analytical tools like SWOT analysis, Porters five Forces analysis in conjunction with utility analysis and investment come analysis. The report provides a comprehensive associate degreealysis of the outstanding players of the market with an full analysis of their company outline, product portfolio, production and manufacturing capability, technological and products developments and revenue estimations. The report any examines key maths data and facts relating the worldwide Luxury Countertops market. The report any aims to supply a competitive advantage to the readers, clients, shoppers and market professionals engaged among the business.

Do You Have Any Query or Specific Requirement? Ask to Our Industry Expert: https://calibreresearch.com/report/covid19-impact-luxury-countertops-market-27899#inquiry-for-buying

Global and United States Luxury Countertops Market study provides essential information regarding the foremost challenges that area unit close to influence market growth. The report additionally provides overall details regarding the business opportunities to key stakeholders to expand their business and capture revenues among the precise verticals. The report will facilitate the current or coming back companies throughout this market to seem at the various aspects of this domain before finance or increasing their business among the Luxury Countertops market.

Along with a generalized market study, the report additionally consists of the risks that area unit usually neglected once it involves the Luxury Countertops industry in an exceedingly comprehensive manner. The study is additionally divided in associate degree associate degreealytical area wherever the forecast is expected through a primary and secondary analysis methodologies along side an in-house model.

Checkout FREE Report Sample of Luxury Countertops Market Report for Better Understanding: https://calibreresearch.com/report/covid19-impact-luxury-countertops-market-27899#request-sample

For a world reaching, the Luxury Countertops study additionally classifies the market into a world distribution wherever key market demographics area unit established supported the bulk of the market share. the subsequent markets that area unit usually thought of for establishing a world reaching area unit North America, Europe, Asia and therefore the remainder of the planet. reckoning on the study, the subsequent markets area unit usually interchanged, added, or excluded as sure markets solely adhere to sure products and desires.

Originally posted here:
Global and United States Luxury Countertops Market To Record Exponential Growth During Projected Timeperiod 2020-2026 by Aristech Surfaces, Armas...

How many times this year have you thought to yourself, What's going to happen next? I've found myself asking that question related to the coronavirus, deaths, shutdowns, cancellations, civil unrest, politics ... even sports. (The University of Michigan is really going to play football even when students have been ordered to quarantine in place because of rising COVID-19 cases?)

So I shouldn't be surprised to see that even some experts aren't united on predicting how business will fare in the coming months.

Just look at two stories from this week's print issue of Plastics News. On the one hand, you've got consultant Laurie Harbour and her company, Harbour Results Inc., saying they expect 30 percent of North American manufacturers to close in the next 18 months, with almost half of those being tool and die shops.

That's in part due to automakers slowing orders.

But on the other hand, as PN Economics Editor Bill Wood notes, the number of bankruptcies is currently lower than the historic trend. And the Small Business Optimism Index actually climbed 3.8 points in September. Bill is forecasting a 5 percent climb in U.S. GDP in 2021.

As for me? I have no idea what is going to happen next.

See the rest here:
Kickstart: The future is either going to be fine or a looming disaster - Plastics News

Published 2:00am EDT, Friday, October 23, 2020

Renovated kitchen / $375,000

This 1923 white single-family has a freshly painted interior and carpet upstairs pulled up to show the gleaming hardwood floors. The home - which boasts six rooms and sits on 0.11-acres - has an updated and renovated extra-large kitchen with granite countertops and stainless-steel appliances that leads to a dining area for all your entertaining needs. The kitchen - which has a nice flow into the dining area- also has an island. A large living room and full bath completes the first floor. An oversized deck and private, flat-level backyard on an inviting cul-de-sac add to this homes appeal. Upstairs you will find three nice-sized bedrooms and another full bath. The versatile lower level is for the family room and an office. The property which has great value is walking distance to the train station, shopping, restaurants and more. The home is being sold as-is.

Listing agents: Todd Auslander and Jeannie Kasindorf, Auslander Kasindorf Group / Keller Williams; 203-504-3067, Tauslander@kw.com and Jkasindorf@kw.com

45 Morris St., Stamford

Beds: 3 Bath: 2

Square footage: 1,452

{{captions}} {{credits}} {{resaleLink}}

Continued here:
Renovated kitchen / $375,000 - The Advocate

'); $("#expandable-weather-block .modal-body #mrd-alert"+ alertCount).append(""+val.title+""); // if (window.location.hostname == "www.kmov.com" || window.location.hostname == "www.kctv5.com" || window.location.hostname == "www.azfamily.com" || window.location.hostname == "www.kptv.com" || window.location.hostname == "www.fox5vegas.com" || window.location.hostname == "www.wfsb.com") { if (val.poly != "" && val.polyimg != "") { $("#expandable-weather-block .modal-body #mrd-alert"+ alertCount).append('"+val.ihtml+""); $("#expandable-weather-block .weather-index-alerts").show(); $("#expandable-weather-block .modal-body h2").css({"font-family":"'Fira Sans', sans-serif", "font-weight":"500", "padding-bottom":"10px"}); $("#expandable-weather-block .modal-body p").css({"font-size":"14px", "line-height":"24px"}); $("#expandable-weather-block .modal-body span.wxalertnum").css({"float":"left", "width":"40px", "height":"40px", "color":"#ffffff", "line-height":"40px", "background-color":"#888888", "border-radius":"40px", "text-align":"center", "margin-right":"12px"}); $("#expandable-weather-block .modal-body b").css("font-size", "18px"); $("#expandable-weather-block .modal-body li").css({"font-size":"14px", "line-height":"18px", "margin-bottom":"10px"}); $("#expandable-weather-block .modal-body ul").css({"margin-bottom":"24px"}); $("#expandable-weather-block .modal-body pre").css({"margin-bottom":"24px"}); $("#expandable-weather-block .modal-body img").css({"width":"100%", "margin-bottom":"20px", "borderWidth":"1px", "border-style":"solid", "border-color":"#aaaaaa"}); $("#expandable-weather-block .modal-body #mrd-alert"+ alertCount).css({"borderWidth":"0", "border-bottom-width":"1px", "border-style":"dashed", "border-color":"#aaaaaa", "padding-bottom":"10px", "margin-bottom":"40px"}); }); } function parseAlertJSON(json) { console.log(json); alertCount = 0; if (Object.keys(json.alerts).length > 0) { $("#mrd-wx-alerts .modal-body ").empty(); } $.each(json.alerts, function(key, val) { alertCount++; $("#mrd-wx-alerts .alert_count").text(alertCount); $("#mrd-wx-alerts .modal-body ").append(''); $("#mrd-wx-alerts .modal-body #mrd-alert"+ alertCount).append(""+val.title+""); // if (window.location.hostname == "www.kmov.com" || window.location.hostname == "www.kctv5.com" || window.location.hostname == "www.azfamily.com" || window.location.hostname == "www.kptv.com" || window.location.hostname == "www.fox5vegas.com" || window.location.hostname == "www.wfsb.com") { if (val.poly != "" && val.polyimg != "") { $("#mrd-wx-alerts .modal-body #mrd-alert"+ alertCount).append(''); } else if (val.fips != "" && val.fipsimg != "") { // $("#mrd-wx-alerts .modal-body #mrd-alert"+ alertCount).append(''); } // } //val.instr = val.instr.replace(/[W_]+/g," "); $("#mrd-wx-alerts .modal-body #mrd-alert"+ alertCount).append(val.dhtml+"

Instruction

Read more from the original source:
What Are Countertop Smart Ovens, and Do You Need One? - WFSB

A sink is undoubtedly an important part of any kitchen. Whether you opt for a stainless steel sink, a farmhouse sink, or any of the many other style and material combinations, you'll have to make another big decision: single bowl or double bowl? While two might seem better than one, there are other factors to consider.

In its most basic form, a double bowl sink is divided into two bowls and two drains. Some models feature bowls of equal size, while others have a larger bowl alongside a smaller, shallower one. Whatever the combination, a double bowl sink can be a good option for kitchens where there is no dishwasher -- one sink can be used for washing dishes and the other for food prep. If there's a garbage disposal, it's even better, as you can send the food scraps on their way in one bowl and leave the other free for cleaning.

While the double bowl sink is certainly functional, it can make washing very large pots and pans a bit more difficult depending on the size of the sink. And if you also plan to use the kitchen sink to bathe a baby -- or a fur baby -- you might find that the double bowl sink is too restricting.

Sink choice also depends on the size of the kitchen. Single bowl sinks are a better option for smaller kitchens, as the two-bowl model is larger and will take up more counter space. It will also take up more storage space underneath the sink, especially if you have a garbage disposal attached. But if you have a kitchen with countertops and cabinets to spare, a double bowl sink will fit in just fine.

It's hard to narrow down a price for a double bowl sink because they come in a variety of sizes and materials ranging from budget-friendly to high-end. Then there's the installation: undermount? Drop-in? Tight radius?

HomeAdvisor.com (NASDAQ: ANGI) reports that the average cost of a new kitchen sink including installation costs $390, but if you choose a higher-end model and setup, it could go up to $2,000 or higher. Drop-in sinks are on the lower end of the price range, while undermount and farmhouse-style sinks are pricier.

When comparing sinks of the same material, a double bowl sink will usually be slightly pricier. For example, a stainless steel double bowl sink will be more expensive than a single bowl because the entire unit is bigger. However, a single bowl quartz sink or a fireclay farmhouse sink would likely be higher in price than even a double bowl model made from a more economical material.

It's not the number of bowls but rather the material and style of the kitchen sink that holds the real value. Farmhouse sinks continue to be a trend and are often noted in real estate listings, which is evidence of their cachet for homeowners. But even more important than the style of sink is its installation. For example, undermount sinks that fit seamlessly into the countertop make cleaning up after cooking a breeze.

The kitchen is arguably one of the most important rooms of the home, and the sink plays a crucial role. When planning a kitchen remodel, consider the material and installation of the sink first and foremost; then consider single versus double bowl models, depending on the size of the space.

See the original post here:
Double Bowl Sink: Worth the Investment? - Motley Fool

With most of the development in Toronto going vertical, it's hard to find new ground-hugging homes in the city with family-sized backyards andgarages. One such rare site is set to bring 41 new homes to a former public school property atCaledonia Road andInnes Avenue in the Earlscourt neighbourhood. We got a first look at updated plans for theSt Clair Villageproject byFrontdoor Developments Incearlier this month, and new interior renderings and details are nowoffering up a first look inside the future homes.

St. Clair Village, image courtesy of Frontdoor Developments

The work of Hunt Design Associates Inc, the project's units are set to includenine-foot ceiling heights on ground, main, second, and upper floors. Some notable features being offered includeelectric fireplaces, glass interior panel railings,staircases withnatural oak treads, risers, and painted stringers, and wide plank engineered wood flooring in all areas except for spaces like bathrooms, which are to feature porcelain floor tiling.

Suite interior at St. Clair Village, image courtesy of Frontdoor Developments

Kitchens at St. Clair Village will boast open-concept layouts, with select plans to includekitchen islands. Cabinetry and quartz countertops arebeing offeredin a choice of two colour schemes, along with the choice of porcelain tile or wood flooring. Tile backsplashes, soft-close drawers, and stainless steel undermount sinks are among the other features listed for kitchens.

Bathrooms are being offered withquartz countertops in two colour choices and undermount sinks. Ensuites will featureframeless glass shower enclosures with porcelain tile walls, and free-standing soaker tubs in all standard floorplans. Other features includepolished chrome plumbing fixtures and elongated dual-flush toilers in master ensuite and main-floor powder rooms.

Suite interior at St. Clair Village, image courtesy of Frontdoor Developments

Units at StClair Village range inarea from 3,005 to 3,040 ft, and start from $1,500,000. The project's onsite sales centre at 19 Innes Avenue can be visited by appointment. Construction is targeted to wrap up in time for the first move-ins in September, 2021.

Suite interior at St. Clair Village, image courtesy of Frontdoor Developments

Additional information and images can be found in our Database file for the project, linked below. Want to get involved in the discussion? Check out the associated Forum thread, or leave a comment in the space provided on this page.

* * *

UrbanToronto has a new way you can track projects through the planning process on a daily basis. Sign up for afree trial of our New Development Insiderhere.

Read more here:
Finishes and Features Provide Interior Preview of St. Clair Village - Urban Toronto

A latest specialized intelligence report published by KandJ Market Research with the title2020-2029 Report on Global Countertop Toaster Oven Market by Player, Region, Type, Application and Sales Channelhas the ability to help the decision-makers in the most important market in the world that has played a significantly important role in making a progressive impact on the global economy. The Global Countertop Toaster Oven Research Report presents and showcases a vital vision of the global scenario in terms of Countertop Toaster Oven market size, market potentials, and competitive environment. The study is derivative from primary and secondary statistical data and consists of qualitative and quantitative analysis of the industry and key players.

The latest report includes post Coronavirus(Covid-19) Impact on the Countertop Toaster Oven Industry, it includes on Industry Upstream, Industry Downstream, Industry Channels, Industry Competition, and finally on Industry Employment.

The Final Report Will Comprise the Impact of COVID-19 Analysis in ThisCountertop Toaster Oven Industry. For Sample Report & Graphs & Charts @:www.kandjmarketresearch.com/sample-request/517059

The global Countertop Toaster Oven market is showing promising signs that can be explored well in the coming days to achieve a notable valuation by the end of mentioned Forecast. The report is expected to consider the time-frame as the forecast period and it would deal with the market accordingly. Growth-inducing factors have been monitored closely in the report to gauge well the progress of the market. Each factor can play a significant role and has been given proper space on the basis of which the market can devise strategies. It has tracked various associated fields as well to get a proper map of how these end user industries are impacting the market and can take the market forward. The report has a credibility as it banks on the expertise of adept researchers who fetch numbers from a pool of information and sieve them as per the requirement. In the process, they have gone through the market by having it analyzed on top-down and bottom-up basis.

Key Segments Studied in the Global Countertop Toaster Oven Market:Market Analysis by Key Players such asRATIONAL, Werner&Pfleiderer, Wiesheu, Eloma, Convotherm, MIWE, Middleby, Panasonic, Philips, Joyoung, Electrolux, Media, KENWOOD, Cuisinart, Frigidaire, Calphalon, Kenmore Elite, APW Wyott, Belleco, Breville, Cadco, B&D, Equipex, Hamilton Beach, Hatco, Hobart, KitchenAid, Lincoln, Nemco Food Equipment, Oster

Market Analysis by Type of Countertop Toaster Oven:Gas Ovens, Electric Ovens

Market Analysis by Applications of Countertop Toaster Oven:Household, Food Service, Food Processing

Ask Discount for this premium report @www.kandjmarketresearch.com/discount/517059

Analysis by Regions of Countertop Toaster Oven Market: North America (United States, Canada and Mexico), Europe (Germany, UK, France, Italy, Russia and Spain etc.), Asia-Pacific (China, Japan, Korea, India, Australia and Southeast Asia etc.), South America (Brazil, Argentina and Colombia etc.), Middle East & Africa (South Africa, UAE and Saudi Arabia etc.)

The segmentation plays a prominent role in dealing with the growth of the Countertop Toaster Oven market where various types and applications are promoting better understanding of the market. This segmentation has a strong foundation in volume-wise and value-wise data which backs the process of understanding the market scenario with numbers. The market has been combed through properly to get all the factors in line. The report has been enriched interviews as a first hand method of getting data. These interviews include chats with top market players, market analysts, distributors, people in the field of research and development and others owing to which the reliability of the report has increased significantly.

Regional market analysis of the report has backed the study of different regions as an attempt to understand growth pockets that can be beneficial for the market. The regional analysis has import, export, and other processes covered. Players who are getting involved in the market for a better growth are looking for these growth pockets to capitalize on the opportunities provided and find new scopes for growth. Certain countries have been tracked in detail to monitor them closely as they can be major markets in the coming years. Benefits like better infrastructure, cost-effective labor, access to raw materials, they offer have become luring factors for many market players and they want to expand their business to these regions to increase their profit margin.

Read More Detailed Information regardingCountertop Toaster Oven Industry with Covid-19 Updates@www.kandjmarketresearch.com/reports/517059

About Us:Kandjmarketresearch.com is part of the KnowledgeNJournals Research Firm which provides premium progressive market research reports, statistical surveying, analysis & forecast data for industries and governments from hundreds of publishers around the world. We have almost all top publishers reports in our collection to provide you with instant online access to the worlds most complete and fresh database on a Daily Basis. We are at KandJ Market Research are inspired to help our clients grow by providing appropriate business insight with our huge market intelligence source.

Contact us:Yash KandJ Market Research (Part of KnowledgeNJournals Research)

USA:+1 (661) 636 6162 |IND:+91 9325802062Email:[emailprotected];Web:www.kandjmarketresearch.com

Read more from the original source:
Countertop Toaster Oven Report: Globally Players, Applications, Types And Forecast To 2029 - KYT24

UPDATE: An open house is scheduled for 1-3 p.m. Saturday, October 24.

SPONSORED: This two-bedroom, two-bathroom home is located at 538 S. Eola Drive [GMap] in downtown Orlandos Historic Lake Cherokee neighborhood, just blocks away from popular Thornton Park restaurants, Dr. Phillips Center for the Performing Arts, and zoned for the A-rated Blankner K-8 and Boone High School.

This 1,012 SF home boasts a great front porch and abundant character and charm. The interior has been freshly painted and features original hardwood floors throughout and lots of natural light.

The kitchen features new stainless steel appliances and granite countertops and other features include a new roof installed in 2019, a new hot water heater from 2020, a new A/C unit from 2019, and a transferrable Terminex drywood and subterrandian termite bond.

The backyard is fully fenced and boasts a deck and a patio for an easy, low-maintenance outdoor entertaining space.

The asking price is $339,000.

Click HERE for a tour or contact Julie Bowyer, Keller Williams at the Parks, at 407-758-0153 or[emailprotected].

All photos by Gil Levy,Framed Listings.

Read more:
House of the Day: 2/2 Lake Cherokee home asking $339000 - Bungalower