Home Air Conditioning Compressor Replacement | DoItYourself.com

The compressor may eventually need to replaced in a home air conditioning system that is often used. Usually, the outside half of a standard air conditioning system uses a refrigerant compressor. These systems are also known for their use of condensing coils. The compressor of an air conditioning system refers to the pump inside the motor. This pump is responsible for pulling heat laden refrigerant gas from the inside components of the building. Once the gas has been drawn, it is compressed. The gas transforms from a low pressure substance to a high pressured one.

The refrigerant gas which was transformed into a high pressure andhigh temperature substance will be transferred to the condensing coil. The condensing oil in turn cools the gas into a liquid state. The gas is cooled using a fan or blower inside the condensing oil. Another way to cool the gas is through theimmersion of the coil into cold water. From time to time, the compressor of the air conditioning system gets wearied down. When this happens, they often need to be replaced.

Usually, compressor replacement is something that should be professionally done. Although it is not your usual home improvement project or a mere bolt-in thing to do, it is still aprofitabletask to learn. This is a task which will be able to get completed by following the following steps.

Try to see whether or not the compressor is still capable of doing its job within the cooling system. Try to check the temperature of the air coming out from the air conditioning system.

Before buying a replacement make sure you got the model right. Usually the model type of th compressor is indicated in the manual.

Before opening the air conditioning system, you should cut off all power supply. This will help prevent any accidents from happening.

Open the cooling system and remove the refrigerant. The system should be ridden of all refrigerants. The latest measures require that instead of releasing refrigerant outside, it should be captured. This is part of newest environmental protocols. For the newer models, its not necessary to replace all parts of the compressor.

The line of the refrigerant should be cut. After this, take out the compressor. The area of the compressor is usually located outside. You wont have a problem finding it.

Before replacing the compressor, you have to unbolt it first. When unbolting the compressor of the air conditioner, the hosing from it is attached should be removed. Usually, compressors come with a single bolt. This standard setup provides holding for both the low and high pressure lines. The compressor should be unbolted from this holding and the accessory bracket. The pressure lines should also be unfastened. These lines should be attached once the compressor has been replaced.

The replacement compressor should be placed within the condenser unit. Connect the lines of the refrigerant once gain. Given that the refrigerant needs replacing; other controls or the coils should be replaced as well.

Read the original here:
Home Air Conditioning Compressor Replacement | DoItYourself.com