3 Ways to Install Gutters – wikiHow

Edit Article

In this Article:Getting StartedPlanning the Slope of the GuttersSizing, Cutting, and Installing the GuttersCommunity Q&A

Rain gutters and downspouts are essential tools that are used to divert and carry rainwater away from the foundation of your house. They help to prevent soil erosion, damage to siding, and basement leaks. It is essential that gutters are measured, pitched, and installed correctly in order to function properly. Gutter installation is a job that many homeowners can tackle on their own with a little effort and the proper tools. Read the article below for instructions on how to install gutters.

Method 1

1

2

Method 2

1

2

3

Then, locate the ending point, or the downspout location, of the gutter run. This will be at the corner of a fascia board, and may include one downspout being fed by two different gutters.

4

5

Snap a chalk line between the high and low points. Use a level or a measuring stick to try to get an even line. This will be a guidepost for your gutters, so it helps to be precise.

Method 3

1

Cut the gutters to size. Use a hacksaw, or heavy duty tin snips to cut the gutter at the appropriate measurement. You may need to cut your gutters at a 45 degree angle if two gutters meet at a corner.

2

3

Mark the location for the downspout opening on the gutter. Use a jigsaw to cut a square opening at the appropriate place in the gutter.

4

Attach the downspout connector and end cap to the gutter using silicone sealant and short metal screws. An end cap should be used on any open-ended run of gutter.

5

6

7

8

Seal any gutter connection seams with a heavy bead of sealant and allow to dry overnight.

Question

What if my facia angles into the house instead of straight down?

Justin Kirkman

Community Answer

Figure out the angle and cut wood blocks. Use wood that's the same size as the facia. (If it's 2x6 facia, use 2x6 material and install it two feet apart on the facia.) An easy way to find the angle is to sit a block of wood against the outside of the facia and hold a level until the block is plumb; then, trace the line.

Ask a Question

Loading...

Upload error

Thanks to all authors for creating a page that has been read 102,612 times.

YesNo

See the original post here:
3 Ways to Install Gutters - wikiHow