27-01-2012 15:05 http://www.drenergysaver.com | 1-866-372-8114 While replacing an old window with a brand new high efficiency model, Larry Janesky from Dr. Energy Saver demonstrates how to install a replacement window for the best energy efficiency, and explains what a window energy efficiency label means. A window is always the coldest spot in a wall and can feel leaky from heat transfers and the "convective loop." High efficiency replacement windows -- if installed properly -- can help your home feel less drafty, save on energy costs, and look great. Understanding the labels and energy efficiency ratings will help you shop and save money with replacement windows. For a Free Window Replacement Estimate contact Dr. Energy Saver today. If you are a HVAC or Home Improvement Contractor, check out our exciting franchise opportunity. http

Visit link:
Replacing an Old Window with a New High Efficiency Window - Video

30-01-2012 13:24 Locating Your Sales Order Number Our customer service representatives will ask you to provide the sales order number or, SO number, in order to identify your window in our system. In the top right or left corner of the glass in between the two panes on the metal spacer, there will be a series of numbers -- usually five to eight digits - followed by a decimal and three digits. Please have this number ready when speaking with your Milgard representative as it will expedite your service.

Originally posted here:
Locating Your Sales Order Number - Milgard Service Video - Video

30-01-2012 13:24 Maintaining Your Sliding Window - We are going to learn how to maintain your sliding window. The first step is to slide open the sash. On the top of the window, you will notice a few tabs. These tabs prevent the sash from being removed from the outside. Next, we will remove the sash. Ensure the window is clear of the last tab and the lock is not touching the jamb. Lift up on the sash from the bottom. Pull out and down to remove the sash. / You may notice that moisture and debris is present in the window track, this is normal. Using a putty knife, lift up and remove the track. Using a non-abrasive cloth, soap, and water, clean the track. It is important to avoid abrasive chemicals. To reinstall, slide the track in the groove, sloping it away from you, and press down. The track will need to be snapped into place. A soft block of wood and mallet are needed for this. Place the block of wood at an angle on the track and pound the block along the length of the track to snap into place. Install the sash from the top, slide it in from the bottom. Next, you will need to have access to the outside of the window to check and clean the weep-hole cover and weep-hole. A putty knife and pipe cleaner are needed. Take off the weep-hole cover. Inspect to ensure the flap is moving. Use the pipe cleaner to clean the weep-hole of excess debris. Place the weep-hole cover back into the weep-hole.

Read the rest here:
Maintaining Your Sliding Window - Milgard Service Video - Video

30-01-2012 13:26 Adjusting the Sliding Window Rollers for Smooth Operation - We are going to show you how to adjust and clean the rollers. Occasional adjustments may be needed to maintain smooth window operation. On the bottom of your window there are two assemblies containing vinyl wheels. Each assembly has two positions for each wheel. Remove the wheel by snapping it out of the wheel casing. Raise or lower the wheels to the desired height and snap them back into place. Repeat this step on the other wheel assembly. Once the wheels are snapped back into place, clean your rollers. Make sure the wheels roll back and forth, and there is no dirt or debris in them. Spray your wheels with a small amount of silicone spray-- just a quick shot for each one. Take a paper towel and wipe down the rollers to ensure sure there is no excess silicone. To reinstall the sash, start with the top. Slide in from the bottom and slide it back and forth.

Go here to see the original:
Adjusting the Sliding Window Rollers for Smooth Operation - Milgard Service Video - Video

30-01-2012 13:25 Proper Single Hung Sash Removal - We are going to show you how to remove the sash, the operable portion of the window. There is a silver take-out clip on either side of the jamb. With the sash closed, use a screwdriver to pop the clips out at a 45 degree angle. Perform this on action on both take-out clips. Remove the sash stops, which are located in the top corners of the window. Slide the sash up until you feel it disengage. You will want to make sure both sides catch on the take-out clips. Once they catch, you want to be able to see the bottom of the spring loaded balancers and you know you are past the engagement point. Slide the sash to one side and remove. To re-insert the sash, place it above the bottom of the balancer. Line up the sash, push it in. Make sure you have clearance on the other side and balance it back and forth until you feel both tops catch. Slide the sash down about an inch or two. Make sure you do not see the balancer or any metal on either side of the spring. Then, push in both of your take out clips and bring down the sash. Finally, reinstall the sash stops.

The rest is here:
Proper Single Hung Sash Removal - Milgard Service Video - Video

30-01-2012 13:27 Balancer Replacement - We are going to show you how to uninstall and reinstall a balancer. There is a silver take-out clip on either side of the jamb. With the sash closed, use a screwdriver to pop the clips out at a 45 degree angle. Perform this on action on both take-out clips. Remove the sash stops, which are located in the top corners of the window. Slide the sash up until you feel it disengage. You will want to make sure both sides catch on the take-out clips. Once they catch, you want to be able to see the bottom of the spring loaded balancers and you know you are past the engagement point. Slide the sash to one side and remove. This is the balancer. It is spring loaded, so use caution when removing. To remove, push it down and slide it back up. To reinstall, look for hook at the bottom of the balancer. Place the hook in the window jamb and press down. Remember, the balancer is spring-loaded so you will experience some resistance when pushing it down. Push the top portion up and the tab goes on the outside of the balancer. Next, we will reinstall the sash. Place the sash above the bottom of the balancer. Line up the sash, push it in. Make sure you have clearance on the other side and balance it back and forth until you feel both tops catch. Slide the sash down about an inch or two. Make sure you do not see the balancer or any metal on either side of the spring. Then, push in both of your take out clips and bring down the sash. Finally, reinstall the sash stops.

Read the original post:
Balancer Replacement - Milgard Service Video - Video

22-12-2011 14:10 yellow.co.nz Auckland Glass Ltd located in Auckland is an excellent choice if you are looking for "window repair" or "window replacement". To learn more call 0800 804 804, visit us at 4 Southdown La, Auckland 1061, or click on the above link.

See the rest here:
Window Repair Auckland Glass Ltd - Video

28-01-2012 20:00 Integrity Auto Glass 816-674-4744 Windshield Replacement | Auto Glass Repair | Kansas City | 816-674-4744 Broken windshield or car window? We come to you! Trust Kansas City's experts with your auto glass repair and replacement needs. We come to you! For an auto glass quote or to schedule service, Call 816-647-4744 ASAP - We Have You Shielded! Integrity Auto Glass makes it easy for your personal or business needs. We take pride in giving the best custoemr service possible and the best deal on windshield replacement or windshield repair for your automobile, car or truck. Whether your personal vehicle is in need of auto glass repair or replacement, or if it is a business vehicle, we offer the best deals in Kansas City to remedy your auto glass chip, crack, or full replacement. Call today to find out more information about: Choosing an Auto Glass Professional Windshield

More:
Windshield Installation | 816-674-4744 | Kansas City | Broken Windsheilds Replaced | Best Prices - Video

29-01-2012 13:06 Window World of the Ozarks is a proud sponsor of the Window World Weather Kid on KNWA. Is your child a Weather Enthusiast? If so, sign him or her up to be a Window World Weather Kid. Twice a month, a child between the ages of 6 and 14 will be chosen as the Window World Weather Kid and will give the forecast with Chief Meteorologist, Dan Skoff during the 5:00 and 6:00 pm news on KNWA. We're ready to meet many of your home remodeling needs; Call us today to schedule a free in-home estimate, 866-225-6760; Fort Smith, Springdale, AR. http://www.windowworldozarks.com

See the article here:
Window World Weather Kids on KNWA - Video

29-01-2012 15:23 Integrity Auto Glass 816-674-4744 Windshield Replacement | Auto Glass Repair | Kansas City | 816-674-4744 Broken windshield or car window? We come to you! Trust Kansas City's experts with your auto glass repair and replacement needs. We come to you! For an auto glass quote or to schedule service, Call 816-647-4744 ASAP - We Have You Shielded! Integrity Auto Glass makes it easy for your personal or business needs. We take pride in giving the best custoemr service possible and the best deal on windshield replacement or windshield repair for your automobile, car or truck. Whether your personal vehicle is in need of auto glass repair or replacement, or if it is a business vehicle, we offer the best deals in Kansas City to remedy your auto glass chip, crack, or full replacement. Call today to find out more information about: Choosing an Auto Glass Professional Windshield

More:
816-674-4744 | Emergency Windshield Replacement | Kansas City | MO | KS | Kansas | Fast - Video