When it's cold outside, is it safe to bring a socially distanced gathering into your house if the windows are open for a short bit and then shut so indoor temperatures don't plummet? We answer this question below. Tessa Bunney/Corbis via Getty Images hide caption

When it's cold outside, is it safe to bring a socially distanced gathering into your house if the windows are open for a short bit and then shut so indoor temperatures don't plummet? We answer this question below.

Each week, we answer frequently asked questions about life during the coronavirus crisis. If you have a question you'd like us to consider for a future post, email us at goatsandsoda@npr.org with the subject line: "Weekly Coronavirus Questions."

I live in a cold (North Dakota) climate and will very soon have to give up outdoor socializing. If I want to try indoor socializing, it'll be too cold to keep windows wide open for a long stretch. Would it help to open a window or door for a minute or two every so often?

Brr! Around the U.S., as colder temperatures set in, outdoor social gatherings can be harder to swing. Even our dearest friends would find it hard to join us for a snowy, windy backyard picnic or around-the-block stroll.

So from a comfort perspective, it makes sense to consider moving social activities indoors. But you're definitely incurring more risk: The outdoor air can disrupt potentially infectious exhalations. Is there a way to use open windows, air filters and other strategies to make the indoors more like the outdoors?

Before you go down that road, Sonali Advani, an assistant professor of medicine at Duke University, warns that there are limitations to focusing on ventilation via open windows as a way to prevent viral transmission.

"Ventilation is one of the many interventions we recommend," she says. "All of these measures, from masks to social distancing, work together in symphony. Relying on one alone will inevitably cause gaps in protection."

Those latter two measures masks and distancing are probably more important than just ventilation alone, Advani explains. So the best way to minimize risk is to mask up and stay 6 feet apart.

If you do end up meeting friends indoors and Advani says you should seriously think about that decision because of the heightened risk of transmission associated with inside spaces she's not sure how meaningful opening the windows for a short spell every 15 to 20 minutes would be when it comes to reducing risk. The total effect, she says, would likely be marginal.

Ventilation itself is only really helpful, she argues, when it's highly robust: windows open on both sides of a room to allow for cross-ventilation and an open, airy space with very few people, for example. Most people can't guarantee that at home. "When we talk about ventilation, what we really care about is air exchanges," or the number of times that air gets replaced in each room every hour. That can be accomplished with a robust air-handling system think airplanes and properly outfitted buildings. But, she says, "there's no controlled way of doing that when opening a window."

Stephen Morse, an epidemiology professor at Columbia University, agrees but adds that some ventilation is probably "better than none." So if you feel inclined to blast open a window in the middle of your North Dakota weather, go for it. Just do so while understanding the severe limitations.

And those limitations? Well, as Morse explains, there are potentially lots of them. For instance: "You can't really tell if the virus is in the air just at the moment when the window is not open in which case, you haven't gotten much benefit."

Plus, since there's little to no data on this, Morse says it can be hard for experts to give a definitive answer on risk.

"Opening windows and doors intermittently may have some effect on helping with creating more airflow, but the specifics of each room and situation would be different," Harvard Medical School physician Abraar Karan says.

But one thing is clear, Morse says: "If people are willing to wear masks and commit to social distancing [inside], that will help quite a bit even [indoors with windows closed] in cold weather."

Does holding your breath while walking by an unmasked (or masked) person help reduce the odds of transmission?

It's every pandemic precautionist's worst nightmare. You've followed all the rules siloing yourself to your house or apartment and leaving only for a CDC-approved walk around the block.

But what if an unmasked person passes by? And stops to ask you a question?

What if that person is infected and expelling viral particles? Would holding your breath prevent you from inhaling any potentially infectious bits?

Chances are sorry to report probably not to a great extent.

To begin with, the chances of transmission from a mini-encounter like the one above are rather small, Advani, of Duke, explains especially if you're outdoors and you don't stop to speak with the person you're passing.

"Transmission is unlikely to happen in seconds, so [holding your breath] likely won't make a difference," Karan, of Harvard, says. "If someone just sneezed in front of you, I wouldn't recommend inhaling that, but generally we believe it takes several minutes at least for transmission to occur."

Advani recommends carrying a mask with you to pop on in case a situation like this occurs.

Would spraying some kind of oil like WD-40 or a silicone or lube-type spray on the outside of my mask help trap viral particles better?

When it comes to DIY upgrades on masks, our sources are skeptical.

For one, Advani worries about the impact that rubbing on such an oil would have on filtration efficiency the main purpose of a good mask. And there might even be added risks.

"Oil may cause bacteria to grow and affect the filtration process of the mask," she says. "That might possibly increase the risk of bacterial infection."

In general, our sources stress that people should stick to the basics of COVID-19 protection and try not to get too fancy with it.

"The virus itself largely travels within droplets or aerosol particles. Using an oil coating on a mask has not been studied in this manner to have any effect. Altering mask materials could negate efficacy," says Karan.

He concludes, "I wouldn't put an oil coating on a mask."

Pranav Baskar is a freelance journalist.

Follow this link:
Would Spraying A COVID-19 Mask With Oil Be A Good Thing ... Or A Bad Thing? : Goats and Soda - NPR

Q: I keep getting a message on my PC, which has Windows 10 version 1903. It says Your version of Windows 10 is nearing the end of service. Restart now to get a newer version of Windows. Otherwise well try to restart outside of your active hours. Just make sure to leave your device on and plugged in. How do I know if I should allow this?

Dianna Kincade, Maple Grove

A: You should allow it. By restarting your PC, you will receive a newer version of the Windows 10 operating system. Thats important because the version you have now is about to become obsolete. As a result, it wont receive security updates after Dec. 8.

Why is this happening? Microsoft introduces a new version of Windows 10 for consumers every six months, so there are always several flavors of the operating system in use. Each version becomes obsolete on a predetermined date chosen by Microsoft.

Typically, you arent warned about these expiration dates, because Microsoft replaces your version of Windows 10 well before it expires. This time, Microsoft seems to be running a little behind. I have the same aging version of Windows 10 that you do, and Im still waiting for mine to be replaced.

But Im not concerned about it because:

Microsoft is in the process of updating hundreds of millions of PCs to Windows 10 version 2004, which was introduced in May and wont expire until Dec. 14, 2021. That takes time.

Even if my copy of version 1903 expired before I received the upgrade, it would keep working. And Microsoft could always extend the deadline for cutting off security updates.

But because of this pending update, there are a couple of things Windows 10 users should do:

See if this situation affects you by finding out which version of Windows 10 you have. Click the Windows icon at the lower left of your screen, select the Settings icon (looks like a gear wheel) and click on update and security. Scroll down to OS build info, click the link and look at Windows specifications.

If you havent restarted your PC for a while, do so. If the version 2004 upgrade is already available for on your PC, that will install it.

Q: We used the Legacybox service to convert some old home VCR tapes to a digital format that could be stored on a USB flash drive. We now realize there are some video segments on the flash drive that wed like to remove. Is there a program that would make this easy?

Fred Klietz, Brooklyn Park

A: Try some of the free video editing programs that are available for Mac or PC, such as HitFilm Express 14, Apple iMovie, VideoPad or DaVinci Resolve (see tinyurl.com/yyx4m257). Because Legacybox digitizes VCR tapes in the widely used .mp4 format, any of those programs should be able to edit your videos.

But theres another problem you are likely to face: The video segments you want to discard are probably not individual. mp4 files that are easily deleted. Each Legacybox. mp4 video file will most likely contain an entire VCR tape, and thus might contain two or more hours of video, depending on the speed at which the original VCR tape was recorded. If thats correct, you will find yourself trying to edit out small sections of a very large video file.

E-mail tech questions to steve.j.alexander@gmail.com or write to Tech Q&A, 650 3rd Av. S., Suite 1300, Minneapolis, MN 55488. Include name, city and telephone number.

See the original post here:
What to do if your copy of Windows 10 is obsolete - Minneapolis Star Tribune

Windows 10 is braced for an replace that may include fixes for a irritating flaw that customers have been reporting for a couple of 12 months now.

For some units, Windows 10 has been going critically improper when making use of updates from Windows Update. In some circumstances, customers are offered with an error that might probably go away their units caught in an replace set up loop.

Following numerous chatter, experiences and grievance on numerous on-line boards, Microsoft has confirmed that theyre conscious of the bug that might put your laptop in an infinite replace set up loop.

The drawback has been significantly noticed with Intel drivers and customers obtain a message saying A current driver on your PC may be better than the driver were trying to install. Well keep trying to install.

In addition, the Windows Update bug additionally makes an attempt to downgrade Windows 10 graphics drivers once youve newer and higher drivers already put in.

In a submit on Feedback Hub, Microsoft said that theyve made modifications primarily based on the suggestions and the repair will probably be accessible in future builds.

Weve made an update with the Insider Dev Channel builds so that this error will no longer be shown going forward, Microsoft said.

Its not clear what number of units are affected by this glitch, however weve noticed that customers are nonetheless reporting the issue nearly each week.

In reality, weve seen a number of experiences round Windows 10 replace driver difficulty popping up after customers utilized the Windows 10 May 2020 Update. Its doubtless that extra customers will report the issue once more after the launch of Windows 10 model 20H2.

Previously, the primary workaround talked about by customers was eradicating current drivers, utilizing Microsoft fundamental show drivers, after which putting in the accessible replace utilizing Windows Update.

Another workaround concerned reinstalling Windows 10 or system reset, however now you dont have to fret about these points as Microsoft has lastly confirmed it.

The repair is already accessible in Insider preview builds and we dont know when it will likely be backported to older variations of Windows 10, such because the October 2020 Update and May 2020 Update.

Read the rest here:
Windows 10 replace will lastly repair the irritating bug with PCs - Enter21st

STATEN ISLAND, N.Y. Mold and mildew tend to appear and flourish in areas that are wet, humid and damp. Although most commonly found in bathrooms, mold and mildew show up in basements and attics, and can also be found on porous surfaces like wood, concrete and pavers. Indoors, mold thrives when moist areas are not properly ventilated; outdoors it thrives when there is constant moisture, humidity and heat.

Mold is most noticeable in your bathroom because of the high levels of humidity confined in this small space. It is found in corners and bases of your shower, along tile joints and on caulking. Leaky toilets, sinks and plumbing pipes also increase the likelihood that mold will accumulate in your bathroom. Elements of wood, wallpaper and fabric will also contribute to mold growth.

How do you know you have a mold problem? If you can see it or smell it, you have it. Although bathroom mold is not always clear to see, you should look under sinks, in access doors adjacent to your shower or bathroom fixtures, around exhaust fans, and even in crawl spaces or in the basement under your bathroom.

The best way to prevent mold is to stop it from happening in the first place. If you have a bathroom exhaust fan, use it when you shower or take a bath, and leave it on for about 30 minutes after you leave the bathroom. Removing moisture from the bathroom is one of the greatest things you can do to reduce the chances of mold growth.

If you dont have a bathroom exhaust fan, chances are you have a window. It is a good idea to crack open your window to help circulate air and dry the room more efficiently.

Try to dry toys, shampoo and body wash bottles with a towel, or even paper towel before leaving the bathroom. Allow loofas to dry outside of the shower, as they provide additional surfaces for mold to grow on.

It is a good idea to dry wet towels outside the bathroom. Place hooks behind the doors of your bedrooms and have towels dry for each person in their own room. This will also provide the opportunity to reuse towels for the next time its environmentally conscious and a good green practice.

Remember to wash your bathroom rugs frequently. They are typically heavier than towels and maintain moisture in the bathroom long beyond shower time. Over time, mold, and germs, can develop within the fibers creating a smell and the potential for mold growth.

Use mildew resistant shower liners, and wash or replace them frequently. Try to stretch out your shower curtain after showering to prevent mold from growing in the folds.

Try to keep household humidity levels below 50%. Either your central air conditioning system, a nearby window unit or a dehumidifier can help.

If you have a hand shower, rinse the walls and corners of your shower stall or bathtub to remove any extra soap, shampoo and conditioner that may get stuck in the corners. The oils and wax in these personal care items traps mold if not properly rinsed away after showering.

Clean and dust your bathroom at least once a week, as dust is a food source for mold. During your weekly deep clean, use a spray bottle with a mix of 70% water and 30% bleach and apply to the walls. Leave on for 2 to 3 minutes, then rinse with water. This will eliminate any mold spores.

Have mold? As long as the mold is on the surface, and the infestation isnt too large, you can attempt to remedy it yourself by cleaning your bathroom with mold killing solutions and cleaners like bleach, vinegar or hydrogen peroxide. Just be careful not to mix those products as they may cause a toxic reaction. By stripping away and replacing any caulking or sealant where you see mold, you will completely rid the mold without having to clean it. And lastly, try to open windows and doors after cleaning to provide ventilation and help dry out the surfaces more quickly.

Consider routinely checking your leaks in your bathroom by feeling around pipes and seals under your sink and by the toilet. If you notice your hands are wet, call a plumber before it worsens. Clear your slow drains, as these too can cause mold to grow in your bathroom.

If it is time to freshen up your bathroom, consider using a semi-gloss paint that is moisture resistant, easier to clean and creates a harder surface. This makes it more difficult for mold to grow.

If you have an area affected by mold that is bigger than 10 square feet, it is recommended that you call a professional who can assist in identifying the exact type of mold you are dealing with, and what the proper abatement procedures are.

If you notice mold building up on your walls or insulation, do not handle it yourself. The improper handling of mold can lead to releasing mold spores through your entire house, creating an even bigger issue than you had in the first place.

Max Mannino, President - Tri-Star Construction & Home Improvement

(718) 815-1800 http://www.tri-starconstruction.com

All our experts are licensed, bonded and insured members of the Home Improvement Contractors of Staten Island (HIC of Staten Island). Homeowners should always consult with licensed professionals, check a contractors license through the NYC Department of Consumer Affairs (call 311 for information) and ensure that their project complies with NYC DOB regulations before embarking on any home improvement project. For more information contact us at (718) 356-2323 or visit http://www.hicofsi.org.

To ask your home improvement questions contact: questionsfortheexpert@gmail.com.

Continue reading here:
Ask the expert: Why is there mold in my bathroom? - SILive.com

Q. I live in a designated historic district with strict limits on the type of windows allowed. Many windows in my house are losing the edging around the panes. Can this be repaired, or do I have to replace the windows?

Baltimore

A. The edging you refer to is glazing, a putty-type product that goes on squishy but dries in a way that seals the glass, holds it in place, and sheds water when it rains. Glazing can definitely be replaced. You do not need to replace the windows.

The big question, though, is what level of restoration you want and can afford.

The Window Preservation Alliance, which focuses on preserving old windows, has a directory that lists restoration companies across the country.

These companies do a lot more than just install new glazing. Mylo Celsy, the owner of Corners Historic Restoration in Baltimore, said her crew typically removes the sash the movable sections of a window and takes them to the companys shop. There, the crew strips the layers of old paint, which often contain lead, and removes the old glazing. If the glass isnt cracked, they remove it and set it aside for reuse. If parts of the wood have decayed, they repair or replace the pieces, as needed. Then they reinstall the glass and add new glazing. If the old windows had a rope-and-pulley system to keep the open sash from crashing down, they replace the ropes with new brass chains, which are more durable. And when they reinstall the sash, they add weatherstripping. The windows are totally weatherized, and they open and close easily, Celsy said.

Its a lot of work, so of course its not cheap. Restoring a window this way typically costs at least $1,200 and can go higher, depending on the window, Celsy said.

If you cant afford that, there are other options. If youre handy, you can do it yourself for just the cost of new glazing and some primer paint. There are two basic types of window glazing: oil-based, such as Dap 33 Window Glazing ($4.27 for an 8 oz. tub at The Home Depot) and water-based, such as Dap Latex Window Glazing ($6.20 for a 10.1 oz. tube at The Home Depot). The differences go beyond whether you need to clean up tools with mineral spirits (as you do for the oil-based product) or water (which works with the latex product).

Oil-based glazing, the traditional option, is thick enough to roll into a rope, which makes it easier to tool to a smooth finish than the more gooey latex version, which comes in a tube that fits into a caulk gun. However, if youre just trying to fill in gaps, the latex product is the way to go, said a Dap customer service representative. For good results with the oil-based glazing, its important to follow the whole recommended process, which starts by painting the recess for the glass with oil-based primer, he said. Thats impossible to do with a patch job; it requires taking out the glass.

The latex product, though, can be used to fill gaps. First, remove any sections of the glazing that are cracked and loose. To help with this, use a stiff putty knife or the flat end of a painters 5-in-1 or 6-in-1 tool ($6.48 at The Home Depot). Be careful not to catch the knife on the glazing points, little metal tabs that sit over the glass and press into the wood and that were needed to hold the glass against the frame while the original glazing cured. When all the loose glazing is out, clean the area and let the wood dry. Then, if you even suspect that the old window paint is oil-based, brush on primer (it can be either oil-based or water-based) over the bare areas. When that dries, squeeze out the latex window glazing, using the applicator nozzle to help get a reasonably smooth bead. Follow up by tooling the glazing at an angle that matches the angle of the remaining original glazing.

Tooling the glazing is the tricky part. You might want to watch one or more YouTube videos first; type latex window glazing into the search box. The traditional tool for tooling is a putty knife. Another option is a 2-in-1 glazier tool ($5.98 at The Home Depot). It has a flat blade on one end and an angled blade on the other that automatically creates the desired angle. The angled blade has an opening that ejects excess glazing, reducing the chance of it sticking to the smooth surface youre trying to create.

Latex glazing does not need to be painted, but unless your windows are white, you will want to paint the glazing to match the color. Typically, the glazing is dry and stiff enough to paint after three to seven days, depending on the weather. You can paint right over it without spreading primer paint first.

If youre not interested in doing the repairs yourself, you may want to hire a company that tackles a variety of home repair projects. Some house-painting companies also do this kind of repair, although typically as part of a painting job.

Subscribe to the Globes free real estate newsletter our weekly digest on buying, selling, and design atpages.email.bostonglobe.com/AddressSignUp. Follow us on Facebook, Instagram, and Twitter@globehomes.

Read more:
You can repair windows, but your eyes may glaze over at the cost - Boston.com

Liverpool manager Jurgen Klopp has been urged to sign David Raya (Picture: Getty)

Darren Bent has urged Liverpool to sign Brentford goalkeeper David Raya to replace back-up goalkeeper Adrian.

Reds No. 1 Alisson is currently sidelined with a shoulder injury and his deputy, Adrian, made another mistake during last weekends incredible 7-2 defeat to Aston Villa.

While the summer transfer window closed last week, domestic deals can still be completed up until October 16.

Former England striker Bent believes Premier League champions Liverpool need to address their goalkeeping situation and says they should target Raya.

The 25-year-old has impressed for Championship club Brentford over the past 18 months, with his performances attracting interest from Arsenal before they signed Alex Runarsson as Bernd Lenos deputy.

Bent told Football Insider: For me, I think it is an issue that they [Liverpool] need to address.But where can you find a backup goalkeeper now?

We are talking about the Premier League champions so it shouldnt be that hard but where do you get a goalkeeper that is going to be happy coming into the team to play for six weeks until Alisson comes back and then youre back on the bench.

It has to be a concern because they have seen first-hand what happens when you dont have an adequate backup goalkeeper.

The only one who I can think of as a potentially good back-up goalkeeper is David Raya, maybe him. At the highest level now you cant just rely on your one goalkeeper.

To view this video please enable JavaScript, and consider upgrading to a webbrowser thatsupports HTML5video

The days of Brad Friedel or David James where you can go so long without getting an injury, seasons without getting an injury, seem to be a thing of the past.

I think you need two very good goalkeepers now. They need to find one whose close to Alisson, hes never going to be as good as Alisson.

Meanwhile, Liverpool have also been urged to address their goalkeeping situation by signing Jack Butland from Stoke City.

Follow Metro Sport across our social channels, on Facebook, Twitter and Instagram.

For more stories like this, check our sport page.

MORE: Man Utd slammed over desperate deadline day signings by Liverpool legend

MORE: Gin Wijnaldum rates new Liverpool signings Thiago, Jota and Tsimikas

Read more:
Liverpool urged to sign former Arsenal transfer target David Raya by Darren Bent - Metro.co.uk

Everton are in talks to sign a new goalkeeper after Jordan Pickfords latest mistake.

According to Gianluca Di Marzio, the Toffees are keen on both Robin Olsen and Sergio Romero, with discussions taking place for the Roma and Manchester United glovesmen.

Getty Images - Getty

Olsen, 30, is expected to leave Roma before the 11pm transfer deadline having spent last season on loan with their Serie A rivals Cagliari, while Man United are prepared to cash in on Romero as he fell to third choice in the pecking order earlier this year when Dean Henderson returned to Old Trafford from his loan spell at Sheffield United.

Ole Gunnar Solskjaer has preferred David de Gea as his No.1 with Henderson as back-up, with Lee Grant also on Manchester Uniteds books as a homegrown third option.

Both keepers are now being eyed by high-flying Everton, with manager Carlo Ancelotti keen on adding a new gloveman before the transfer window slams shut.

Despite the Toffees perfect start to the season which sees them top of the Premier League with a 100 per cent record, questions are still being asked of Pickford in goal.

Despite being a talented shot-stopper Pickford remains one of the most mistake-ridden keepers around and he made another error last Saturday as Everton beat Brighton, dropping the ball at the feet of Neal Maupay who willingly converted from close range.

Getty Images - Getty

Pickford has now made the joint-most errors leading to goals since the start of last season, making five mistakes along with Newcastles Martin Dubravka.

Thats more than Chelseas Kepa Arrizabalaga, who has come under serious scrutiny for his mistakes in recent months despite making just two errors leading to goals.

Read more:
Everton in talks to sign Jordan Pickford replacement with two goalkeepers targeted including Manchester - talkSPORT.com

Have you been feeling a draft in your home? Or did a recent storm cause a window to crack? Many things can cause window problems. But knowing your options for the types of replacement windows can help.

So whenever you do have a window issue, you can choose the right window for you. Keep reading to learn more about some common window types.

Single-Hung Windows

One of the most common types of replacement windows is single-hung windows. They look like a standard window, and you can raise the lower part to let air in.

Letting cool air can be nice when your home is too warm. Also, the neutral design of these windows makes them perfect for almost any room.

Some single-hung windows let you move the sash in so that you can clean the outside of the window. That way, you don't have to go outside or get on a ladder for upper levels.

You can find single-hung windows with a few panes or many, so you can get the right size. Then, you can replace your old window without much hassle.

Double-Hung Windows

A double-hung window is a close cousin to the single-hung window. Both look very similar, but you can move the lower and upper parts of the window.

That can come in handy if you want to allow warm air closer to the ceiling. Instead of raising your window, you can lower it.

However, double-hung windows are more expensive. They also have more mechanical parts that can break.

Despite those issues, double-hung windows are more flexible than single-hung. So if you're looking at replacement windows with more functions, consider double-hung.

Casement Windows

You should also consider casement windows when shopping for replacement windows. Casement windows look good in almost any home. They open out, and air can flow in and out easily.

While single-hung and double-hung windows offer decent ventilation, they can only open so much. However, you can open the casement window on a nice day and let more air into your house.

These windows have a hinge on one side, and there's usually a latch on the other. You can open the latch to open the window, and you should be able to lock the window.

That way, you can enjoy nice weather, but you shouldn't have to risk your safety for a casement window.

Picture Windows

If you want replacement styles that offer a lot of light, consider picture windows. You can't always open a picture window, but they can be big and let a lot of light in.

A picture window is excellent if your house doesn't have much light already. By installing the picture window, you can let more natural light in during the day.

They're a great option if you have a nice view of nature, but you can use them in any house. However, you should consider your home so that you can place the picture window in the best place.

These windows are best for rooms that need a lot of light. But the room should be in a position where the sun can get in for much of the day.

Sliding Windows

Sliding windows belong to the category of function replacement window styles. Instead of sliding the window up or down or opening the window out, you slide it to the side.

By opening half of the window, you can let more air in. They're excellent if you need a lot of ventilation, and they look good in almost any home.

These windows typically have two panes, and you can slide one over the other to open and close the window.

You will need to make sure the window runners stay clean so that the window can move easily. Most windows have some sort of metal, and that can develop rust, so you'll need to remove that to keep your window in good condition.

Storm Windows

When looking at different types of replacement windows, consider if they're compatible with storm windows. A storm window works with another window type, and it can improve energy efficiency with single-pane windows.

They can reduce the airflow in and out of your home, and that can keep your energy bill from skyrocketing. A storm window can also provide extra protection for kids when you want to open your windows.

The screen acts as a barrier even when the window itself is open. Also, that screen can keep bugs from getting into your home.

If your window replacement is compatible with a storm window, it's worth the investment in safety and energy efficiency.

Awning Windows

If you want to open your windows but you have frequent rainstorms, consider awning windows. They have a hinge at the top, and they open outward.

You can still let some air in, but the window's design prevents rain from getting into your house. The awning window offers a unique look, and you can use it even when it's not raining.

While they aren't as popular as other kinds of replacement windows, they can look good and work well. You can open the window like you would a casement window.

However, the hinge placement can be a unique look, and you can match it to your home's aesthetic.

Projection Windows

Projection windows use three different windows, and they're at different angles. The angles make the windows reach out of the house, and that can make your room look bigger.

They look similar to bay windows, but the angles are smaller, so the difference isn't as extreme. Projection windows can be nice if you have to replace a large window.

You don't have to go with the standard single-hung or double-hung window style. And depending on the size you get, the can offer a lot of light.

These windows look good in front of your house, but you can put them anywhere that makes sense.

Accent Windows

If you have to replace a small window, consider accent windows. They come in rectangular shapes, but they also can have different designs.

Accent windows don't usually open, so they're best for adding visual interest to a room. You can put one in a hallway or an extra bathroom. These windows also work well in an attic or another small space.

They can let in a little bit of light, but you don't have to worry about maintaining the window's mechanism.

You can choose the right design of the accent window, so that makes them some of the most versatile replacement window styles. That way, you can get the perfect replacement window.

Glass Block Windows

Another more visual type of window is a glass block window. This window uses glass blocks and mortar to hold them together.

In most cases, you can't open the window, but it can keep your home more private. Because of that, they're a great window type for bathrooms, laundry rooms, and hallways.

If you need a small replacement window for your laundry room, you can find a glass block window with a vent. You can connect the dryer hose to let out the air.

Then, you can have some ventilation, but you don't have to worry about someone opening the window or messing with the setup. Glass block windows aren't for everyone, but they can let light in easily.

Basement Hopper Windows

If you spend a lot of time in your basement, you should look at basement hopper windows. They have a hinge at the bottom and open in at the top to let air into your basement.

The window goes near the bottom of your house on the outside, and it can help with airflow and light. However, you should consider when you open it because small bugs may be able to get into your home.

Still, a basement hopper window is one of a few underrated window replacement types. If you have an old basement window, a hopper can be a useful upgrade.

You can use the window like any other type, but it has the perfect design for the average basement window.

Skylights

Moving from the basement to the attic, you can use a skylight as a replacement window. A skylight lets light in from the sky, so it typically goes on the top floor.

You can find a skylight that opens to provide ventilation, or you can get a fixed window that allows for more light. These lights work especially well in sunrooms, but you can put them anywhere.

However, they can lead to excess heat during the summer. And during the winter, the skylight can let too much heat out.

Consider if you currently have a skylight that needs replacing. You can add a skylight, but consider an energy-efficient one if you frequently face extreme temperatures.

The Best Types of Replacement Windows

Whether you've had some high energy bills or notice a crack in a window, you may need a replacement. But you should consider a few types of replacement windows.

While you can replace the current window with the same model, you may want to change things up. Keep these window types in mind next time you renovate your home.

Did you enjoy this article? Check out our blog for more awesome content.

(Disclaimer: Devdiscourse's journalists were not involved in the production of this article. The facts and opinions appearing in the article do not reflect the views of Devdiscourse and Devdiscourse does not claim any responsibility for the same.)

Read the original here:
These Are the Common Types of Replacement Windows - Devdiscourse

Atletico Madrid were left shocked on the final day of the Spanish transfer window as Arsenal triggered the release clause of Thomas Partey with 35 minutes to go before the deadline. It left Atletico powerless to reject the transfer but also prevented them from signing a replacement. However, Spanish rules make it possible for Atletico to sign a replacement within 30 days after the transfer deadline has passed if a club triggers a release clause.

Cadena SER have reported that Atletico have already been in contact with Valencia over the possibility to sign Geoffrey Kondogbia. The Central African Republic midfielder was expected to leave Los Ches during the summer as Valencia have to cut back their wages by a smashing 40 per cent. Kondogbia failed to complete a move but is now reportedly a transfer target for Atletico.

Valencia would not be able to sign a replacement for Kondogbia but the club could be tempted to sell the midfielder. It has been reported that the midfielders release clause is set to drop by at least 50 per cent in January, which makes it sensible for Valencia to consider a sell at this point without the capability to sign a replacement. Kondogbia has been at Valencia since the summer of 2017 and he has made 104 first-team appearances for the club.

Read the original:
Atletico allowed to sign Partey replacement outside of transfer window - Football Inside

Glass,Mother Nature's most distinctive and omnipresentsubstance, might emerge assemi-obsolete down the road, as scientists from the United States Forest Service have recently concocted what they describe as transparent wood, opening the door to what may become the greener, shatterless window of the next decade.

A new research paper titled, A Clear, Strong, and Thermally Insulated Transparent Wood for Energy Efficient Windows published in the Journal of Advanced Functional Materials, from Forest Products Laboratory (FPL) scientist Junyong Zhu in conjunction with colleagues from the University of Maryland and University of Colorado, documents the creation of an advanced transparent wood material. Itoffers the potential of outperforming glass being presently used in all forms of construction in myriad ways.

Used to make clear windows delivering sunlight into dark dwellings since the Late Middle Ages, glass is the most common material used in window construction. However, it's not the most economical or ecological to employ, andis notorious for heat transference, which leads to costly energy bills.

Also, glass production carries a seriously heavy carbon footprint, with processing and manufacturing emissions totaling nearly 25,000 metric tons every year. Transparent wood, as far-fetched as it sounds, could be the answer as it emerges as a frontrunner for a remarkable material of the future.

The sorcery of transparent wood is accomplished by harvesting wood from the swift-growing, low-density balsa tree, which is then treated to a tepid, oxidizing bath that bleaches out almost all aspects of its visibility.

Next, asynthetic polymer called polyvinyl alcohol (PVA) is carefully applied to the wood, where it penetrates the fibrous structure, thus making an amazing, near-invisible product.

The balsa wood's natural cellulose and the injected, energy-absorbing polymer filler allowit to gaingreater durability and become far lighter than traditional glass, with only partial splintering and bending occurring when struck byan object.

With a thermal efficiency five times that of regular glass, transparent wood could seemingly be a smart option for homebuilders and property owners.

The allure originates from it being a sustainable, renewable resource resulting from an astonishingly low level of carbon emissions, and its compatible transition into mainstream industrial processing plants could make it a simple solution to greener construction requirements.

Is transparent wood a clear choice or are you leery of getting splinters from your new bay window?

Read this article:
This kicks glass! Newly created transparent wood could be the window of tomorrow - SYFY WIRE