American Dry Ice Blasting Mold Remediation
American Dry Ice Blasting uses dry ice to remove up to 99% of mold spores in homes, attics, basements, commercial buildings and other locations. We work with...
By: Troy Hallewell
See the article here:
American Dry Ice Blasting Mold Remediation - Video
(631) 615-7779 - Mold Removal Suffolk County Mold Remediation Suffolk County NY Mold Testing
Visit http://waterrestorationservicepros.com to learn more about our Suffolk County mold removal service. We work with all insurance companies in order to ma...
By: WaterRemovalServices
View post:
(631) 615-7779 - Mold Removal Suffolk County Mold Remediation Suffolk County NY Mold Testing - Video
Gainesville, FL (PRWEB) January 10, 2014
Black mold was discovered in one Gainesville apartment complex. In response to it, My Cleaning Products gave out a remediation tip to help the public protect themselves from its many health effects.
According to a report from wcjb.com, which was posted on January 08, 2014, the fungus' presence was found in a total of four apartment units, My Cleaning Products shared. As a result of it, residents of them were evacuated to hotels, it relayed.
The code enforcement, detailed the report, discovered the mold initially in just one apartment, related MCP. However, it added that Community Housing Partners later confirmed that three more units contain the harmful spores.
It was said in the post that residents believed the black mold worsened the asthma problems of the children in the building.
Below is an excerpt from the article Black Mold Found in Gainesville Apartments by My Cleaning Products.
An infestation of black mold could happen anywhere. However, one of the places it recently plagued was an apartment building in Gainesville.
With black mold linked to various health issues, many think that the complex is unsafe for families to live in. One resident of Horizon House Apartments, Erica Brown, even voiced out that the structures should just be torn down and rebuilt.
Black mold poses serious threats to health, My Cleaning Products said. Therefore, one must get rid of it as quickly as possible, it asserted.
However, that doesn't mean other common types of mold could be taken lightly, it stressed. Like black mold, they could also bring in major health problems if ignored for long. And so, they must be eliminated promptly as well.
Erica Browns 6-year-old son doesnt understand why his family cant go home.
Brown and her three young children have been living in a hotel since Monday because of a serious mold problem in her Horizon House apartment.
Its not even safe to go into the apartment, the smell is so horrid, the 26-year-old single mother said. I want a place where I can not be worried about things getting into the walls and into our lungs.
She first noticed the problem last year, only a few months after moving into the complex located at 1515 NW 10th St.
Both she and her two daughters suffer from asthma, so after spotting mold on the ceiling of her bathroom, Brown immediately called maintenance. She was ignored for months. Finally, maintenance came by and discovered the toilet in the apartment upstairs was leaking. The worker sprayed the room with bleach and painted over the area.
Last week, Brown discovered black mold in the closet of the room her 4-year-old and 19-month-old daughters share.
Despite pleas to the landlord and maintenance staff, nothing was done. The complex offered to move her to another apartment, but after talking to neighbors, Brown realized it wouldnt make a difference.
Resident Walette Mulberry, 38, has been battling mold since she moved into her apartment five years ago. Lately, its been getting worse.
Now, she and her two kids ages 8 and 11 sleep in the living room. One of the three bedrooms serves as their closet and changing areas. The other rooms are covered with mold.
Another resident, Onteria Lawrence, had to throw away boxes of clothing, a pile of DVDs and assorted dining room furniture because of mildew.
See the original post here:
Families battling mold in Gainesville apartment complex
An Atlanta woman says an assisted living facility did not properly treat the mold growing in her elderly mother's apartment.
She believes exposure to that mold negatively impacted her mother's health.
Channel 2's Kerry Kavanaugh spoke to the woman and to the facility, which says it is not to blame.
"There was absolutely no concern for the quality of the environment my mother was provided," Doris Parker told Kavanaugh. "I was quite alarmed. I reported it immediately."
Parker believes her 96-year-old mother spent her final weeks living with dangerous mold.
Esta Lipsky was a resident at the Cohen Home, an assisted living facility in Alpharetta.
Parker says she first noticed mold growing in her mother's bathroom early last summer.
"It was a dark blackish color and it was occupying a corner of the wall," Parker said.
Parker says the home acknowledged a leak coming from the above unit. But, she says her mother waited weeks for the fix.
"I assumed the mold was going to be dealt with in a proper manner," Parker said.
See the original post here:
Woman claims assisted living facility never properly cleaned mold from mother's apartment
Los Angeles, CA (PRWEB) January 07, 2014
The work is done, the workers have cleaned up and the bill is in hand. All is well, right? Maybe not, according to most mold professionals. In many cases, post repair mold testing might not be performed. Of course everyone wants to save money these days (especially in today's tough economy), but this may not be the best time to get shortchanged. However, if post mold testing is completed, it is most likely done by the removal company. This in itself may pose a level of trust problem. Most service providers recommend that a Certified Hygienist be called in for post mold testing. While this is a good idea, it may be a costly and unnecessary one, especially in relatively mild cases of mold infestations. Industrial Hygienists are certified by the American Industrial Hygiene Association and equipped with the most current and useful knowledge on Indoor Air Quality. Companies performing mold testing without the use of a third party may inherently cause a conflict of interest. There are at least three goals of mold testing that need to be achieved in the post repair process:
1. Is there actual mold present in the suspected areas? 2. What kind of mold is it? 3. How much mold is present?
In the end, the process of testing for mold again will verify if the level of mold has been reduced to equal or less than the level of mold found in the outside air. The actual testing usually involves taking air or swab samples. An air sample involves a small pump that is calibrated to draw a certain amount of air through a small plastic canister for a specific amount of time. A common method is to draw fifteen liters of air for five minutes. The air cell is then taken to a certified Lab for analysis. In most cases, an outside air sample is taken to compare the level of mold in the home to the level of mold found naturally outside. If the level of mold inside the home is higher than the level of mold found outside, then most service providers will recommend some type of mold remediation work. Generally the cost of each sample to be processed by the lab is around $35. According to Larry Holmes The Home Pro (CEO of Home Pro Environmental), on average most homes require 3-4 samples to get the information needed to make a common sense decision on how extensive the problem may be and how to repair it. After the work is completed Mr. Holmes also recommends taking two air samples inside the home to verify the success of the mold remediation. This of course is a subjective procedure based on an average size home with average remediation work involved.
Pre-repair mold testing is always a good practice. Sometimes finding the exact source of the mold can be frustrating and difficult. Mold spores are everywhere inside homes, up in the attic, in a homes yard outside, living rooms, kitchens, etc. It is a question really of how much and what species of mold that is present. Some molds are worse than others in terms of toxicity. If a building smells moldy, for instance, hidden mold could be the culprit, but perhaps the source cannot be pinpointed. If it is known that there has been water damage and health problems are being reported then is it usually safe to assume that mold growth is present. Modern building materials like wood, drywall, wallpaper, and fabric are excellent food sources for mold, while synthetic stucco building technology can leak and trap moisture inside. Home appliances like washers, dryers and dishwashers also generate water vapors which again create the type of thriving environment conducive to mold infestation.
Mold can be very sneaky hiding in unseen places such as on the back side of dry wall, under wallpaper or paneling, on the top side of ceiling tiles, underneath carpets and pads, etc. Other places include areas inside walls around leaking or condensing pipes, wall surface behind furniture, inside air ducts, and even in roofing materials above ceiling tiles usually from roof leaks or poor insulation. Most home inspectors will use a professional grade moisture meter to help discover areas of moisture in a home that support mold growth. It is always good practice to look for a certified mold inspector that will work to resolve your mold issues on the lowest level possible. It is of course in the best interest of the consumer to hire a knowledgeable technician that uses common sense when deciding how a mold project should be completed. Homeowners can stay involved in the decision making process by asking the right questions.
For more information concerning mold inspection and mold remediation, please visit our website: http://homeproe.com.
Continued here:
Home Pro Environmental Experts Issue a Warning Against Not Testing for Mold Post Repair
Mold Remediation In San Francisco
Mold remediation in process. This video shows the containment barrier at the entrance to the work area. HEPA air scrubber that is used for negative air press...
By: Swift Restoration
Read the original post:
Mold Remediation In San Francisco - Video
Mold Removal Products There are several products you can use to kill and remove mold. Some of the most effective mold removal products include: The How to Kill Mold on Drywall, Wood, Carpet, Tiles and Grout page also provides instructions for removing mold from specific materials.
The Mold Remediation page gives a step by step guide to remediating large mold problems. It covers protective equipment, spore containment, killing the mold, preventing the mold's return, mold disposal and final clean up.
Unfortunately, however, using bleach is only effective if the mold is growing on non-porous materials such as tiles, bathtubs, glass and countertops. Bleach cannot penetrate into porous materials and so it does not come into contact with mold growing beneath the surface of materials such as wood and drywall. Using bleach on these materials will kill the mold above the surface but the roots within the material will remain and the mold will soon return.
One reason is that bleach cannot completely kill mold growing in porous materials. The chlorine in bleach cannot penetrate into porous surfaces such as drywall or wood. The chlorine is left on the surface of porous materials and only the water component of the bleach is absorbed into the material, providing more moisture for the mold to feed on.
Some of the mold on the surface might be killed but the roots of the mold are left intact meaning the mold soon returns, leaving you in a cycle of repeated bleaching. Perhaps this is why some people believe that spraying bleach on mold doesn't affect it but instead just bleaches its color so you can no longer see it.
Another disadvantage of bleach is that it can damage the materials it's used on as it is a harsh, corrosive chemical. Chlorine bleach also gives off harsh fumes and it even produces toxic gas when mixed with ammonia. There are safer alternatives such as borax or vinegar which don't produce dangerous fumes or leave behind toxic residue. For these reasons try to avoid using bleach and if you must use it, only use it on non-porous surfaces.
Borax is commonly used as a deodorizer as well as for cleaning toilets and drains. Borax is also used as an insecticide, herbicide and fungicide and it can be mixed with water in a solution to kill and remove mold as it is a natural mold inhibitor. You can buy borax in supermarkets for a few dollars from the laundry section.
Another disadvantage of using ammonia is that it is a harsh, toxic chemical. Make sure you never mix ammonia with bleach because the gas they create when combined is toxic. Chlorine mixed with ammonia was even used as a chemical weapon during World War 2.
Additionally, although ammonia can kill surface mold, dead mold and dead mold spores are still allergenic so you will need to make sure to remove them afterwards.
Hydrogen peroxide kills mold effectively on many materials such as clothes, floors, bathroom fixtures, walls and items such as kitchen appliances. Since hydrogen peroxide is a bleaching agent it may also help fade the stain mold leaves behind. Spot test hydrogen peroxide on the material you're going to be cleaning to make sure it won't fade the material's colors.
Follow this link:
Mold Removal, How to Kill Mold with Bleach, Borax, Vinegar
The year 2013 was an eventful year for Jefferson City, with events such as the firing of a second city administrator in the past couple years and mold forcing the closure of the old Missouri State Penitentiary to tours. Last year, our newsroom picked the school districts plans for a new high school as our top story of the year. This year, we voted the failed vote to fund that plan as our No. 3 story.
But many in the newsroom agreed the top local story went to the story that was unquestionably bad news for our community: the closure of RR Donnelley and the loss of 475 jobs.
After reading these, let us know whether you agree or disagree. Did we miss or ignore something important? Let us know through comments on the online version of this story or on our Facebook page.
RR Donnelley, Jefferson Citys 12th largest employer, shut down its Jefferson City operations in October, leaving 475 employees without jobs. Many of the workers scrambled to stay employed, while some of the old-timers at the plant used a benefits package to either retire early or take time off before job-seeking.
The loss of jobs caused the city to lower its revenue projections by $50,000 for the current fiscal year. Donnelley, which never returned calls from the media after making its closure announcement, left despite a joint statement from Sen. Mike Kehoe and state representatives Mike Bernskoetter and Jay Barnes, who vowed to see if they could persuade the company to stay.
The facility was established in Jefferson City in 1964, as a part of the Von Hoffmann Press company. It specializes in printing and related business services, including print and digital publications. It has operations around the world, including other Missouri plants in Owensville and Liberty.
In mid-September, Nathan Nickolaus became the second city administrator to be fired by Jefferson City Mayor Eric Struemph.
In a closed session Sept. 16, the City Council voted 8-2 to fire Nickolaus after a standard evaluation of his performance, with 4th Ward Councilwoman Carrie Carroll and 3rd Ward Councilman Ken Hussey casting the opposing votes. Struemph had requested the motion to terminate Nickolaus contract, later saying Nickolaus lacked the necessary experience and failed to meet goals that had been laid out by the council.
Nickolaus was promoted to the city administrator position on an interim basis in May 2011, after the city fired former City Administrator Steve Rasmussen. At that time, Struemph said the reason for Rasmussens firing was that Struemph wanted his own management team on board. Prior to that, Nickolaus had served as city attorney since 2003. In December 2011, the council made the position permanent and, at the time, Struemph said Nickolaus had proven himself during the interim period.
Two weeks after being fired, Nickolaus began work as general counsel for Missouris Economic Development department.
Read the rest here:
Loss of 475 jobs named top local story of 2013
More mold spray - Serum1000
Notice the white bubbles. That is the product Serum 1000 killing all mold and mold spores.
By: A Better Choice Inc.
Go here to read the rest:
More mold spray - Serum1000 - Video