The Solar Initiatives (tSI) heat pump subsidy program has proved to be very popular. Over 40 island families have signed up or are ready to learn more. tSI is offering up to $6,000 to offset the cost of a home heat pump installation. That sounds great, but what is a heat pump and how does it work?

Some heat pump facts:

1. A heat pump does not generate heat; rather it moves (pumps) heat from one place to another, for example, from outside to inside your home. Because it does not generate heat, it is much more efficient regarding energy consumption than the old resistance type electrical heating systems.

2. Not surprisingly then, a heat pump system has two major components: the pump, which is located outdoors and an air-handler (which many folk call a minisplit), which is located indoors.

3. The outdoor unit contains a fan which blows air across a coil. Thus heat is transferred to the fluid in the coil. Then a condenser condenses the fluid making it even hotter and pumps it indoors.

4. At that point the indoor unit goes to work blowing air across the now fluid, heated coil and into the rooms of your home.

5. The fluid that conveys the heat is usually a refrigerant, thus necessitating licensed installers.

6. The connection between the outdoor unit and the indoor one are two pipes, usually about one inch in diameter. Often these pipes are hidden in a soffit for aesthetic reasons.

7. Now one of the magical things about this heat pump system is that it can work backwards! When the direction is reversedit takes heat out of your house and pumps it outdoors. So one heat pump system is a heater in the winter and an air conditioner in the summer.

8. And while cooling your house in the summer, it condenses moisture which is typically drained outside via--wait for it--a drainage hose.

9. Now heat pump systems are generally much more efficient than other heating sources. But when the temperature drops down below 10 degrees F, its efficiency declines. For homes with an existing heat source, the Solar Initiative recommends maintaining that system for use on extremely cold days.

10. Although heat pump systems use pre-manufactured components, the exact sizing and configuration needs to be customized to each home and the owners needs and wishes. Once COVID allows us to resume proposals, contracts, and installations we will do so, but it may be some time before we can install systems in every home that wishes one.

Now lets talk about the subsidy. If the equipment you order for the installation at your home equals or exceeds $6,000 you will receive the full subsidy of $6,000. If not, then you will be eligible for a two thirds subsidy of the installation up to a cap of $6,000. However, you must contact me by email at pappas.anthony@gmail.com before March 31st to be on the subsidy list. Subsequently, CoolEnergy will make a proposal which you will be free to accept or reject.

David Reidy of CoolEnergy is our installer. He will be contacting everyone on our list as soon as health and safety factors allow.

For more information, feel free to call me at 508-272-8822.

See the original post:
Everything you always wanted to know about heat pumps but were afraid to ask - Block Island Times

Everyone wants a home or work environment thats enjoyable to be in. However, some spaces fall short of our ideal with draughty doors, windows that rattle in bad weather, or other such common issues.

Flores Construction offers a variety of construction-based services in the Baltimore, Maryland area. Whether you are fully renovating your space or simply installing new doors and windows, you can rely on the talented and friendly Flores Construction team to provide you with high-quality workmanship and first-class customer service. With their help, you can instantly update your home or workspace and make your money stretch further for the amazing results you get.

Professional, affordable, durable

If youre searching for stylish new window and doors, or perhaps want to complete a bigger remodeling project for your home or office, then look no further than Flores Construction, Baltimore. The company offers reliable and professional window and door installation services to meet every requirement.

For years, the Flores Construction team have been helping homeowners and business owners select and install top quality windows and doors that are suited to every style and budget, all the while consistently offering great value for money and exceptional customer service. The company offers a variety of different types of glass for their window installations, such as clear, frosted, tinted, or even etched. This ensures that there is something to suit every customers unique sense of style and privacy or security needs.

When it comes to doors, Flores Construction once again always strives to meet your design, efficiency and security requirements in your home or office. From start to finish, Flores can guarantee an exceptional service; every team member has the knowledge and professional expertise to perform tasks safely and efficiently, and will carry out the necessary work with utmost respect for you and your property.

A wise investment

Flores Construction knows that replacing draughty old doors and ill-fitting windows is a great investment in your home or place of business. By doing this, you can not only easily update your space on a budget, you can also:

So, if youre in need of door replacement Baltimore, MD or window installation Baltimore, MD, reach out to the team today!

More information

Flores Construction is an expert renovation company based in Baltimore, MD, specializing in window and door installations. For more information, you can visit https://floresconsinc.com/. If you would like to request a free quote or arrange a no-obligation consultation about your design options, you can email [emailprotected] or call the team on (410) 705 2590.

Source:https://thenewsfront.com/flores-construction-specialists-in-window-and-door-installations-and-home-renovations/

Link:
Flores Construction: Specialists in Window and Door Installations and Home Renovations Latest News on The News Front - The News Front

KANSAS CITY, MO (KCTV) Having your heating bills rise in this extreme cold is almost unavoidable, but there are ways to lessen that expense.

Two energy efficiency representatives, one from electricity supplier Evergy and one from natural gas supplier Sprire, walked us through a house to highlight those places and solutions.

I like to work from the bottom and go up, said Evergys Nicholas Newport, move the same way the air does, from the basement into the attic.

Newport said one thing to look for is cobwebs.

Wherever you see cobwebs is actually where the air is moving in and out of the house, Newport explained.

If you have an unfinished basement, you might notice them in the corners of the ceiling. That means you should add some insulation on those upper walls

The basement windows we looked at were filled with cobwebs and on closer inspection, there was light coming through gaps in the wooden window frames.

You can feel that air coming in and now you can see the light coming in, Newport said as he held his hand up to the window.

The way to fix that is with window caulk or low expanding foam.

Another culprit is the pipes, starting in the basement then working your way up.

When youre thinking about air infiltration coming into your house, its coming in from outside and going up through your house and to your attic. And the leading spot for that actually is the bathroom. Newport said.

Those gaps should be filled with an expanding foam spray.

Once upstairs, check your doors. Feel for air. Look for light coming through the sides or bottom.

Spire energy efficiency representative Lemartt Holman suggested a test that involves nothing more than a piece of paper.

If I simply open the door and I place a piece of paper in, [then shut the door], and Im able to easily pull it out, thats another opportunity for insulation, Holman described.

Weather stripping, including door sweeps for the base of the door, can accommodate even canted door frames in a house that has settled over many years

When you screw it into your door, you can adjust the angle of it, Newport clarified.

Until you get to the hardware store for that, theres the quick short-term fix of shoving an old towel up against the bottom of the door.

Then there are the windows.

Youve probably heard about the heat-sealed plastic that can seal windows. You might not want it on windows through which youd escape a fire, but there are other windows you might not think about.

Newport noticed a decorative back door with windows.

On your door here, you have a lot of single pane windows. And this actually get very cold, he noted. To touch it felt like reaching into the refrigerator.

Thats why a storm door is important, but its also where that plastic works well.

Newport said the plastic can go on either side of the window. Pick the side less likely to get paint damage, which is a possibility when removed. If you want the edges less visible, consider putting it on the outside.

And you put on this tape right around the edges here, attach the film to it, cut it to size and use a blow dryer to make it tight, he demonstrated.

Another option is heavyweight curtains.

Holman said its also a good idea to double check the windows with sashes to be sure they are securely closed.

One of the ways that youre able to stop airflow from coming into your home is to make sure that your windows are completely locked, pressing completely to the top, and then locking these, it will help to keep the insulation engaged, he said.

Also, be sure your screen is switched to the storm if you have one. It seems obvious, but some of us might have neglected that.

Spire and Evergy both have programs that offer assistance for bills and rebates for audits and repairs.

*During the winter months, your heat will not be turned off for non-payment. However, the payment is not forgiven, and you will need to come up with a payment plan by Spring.

*Spire and Evergy do offer a Low-Income Home Energy Assistance Program (LIHEAP) which provides federal funding to assist families with maintaining or restoring heating services. You can find more information on whether you qualify and whom to contact in each state here.

*Evergy participates in a program called Dollar-Aide. The money comes from individual customers to help fellow customers who might be struggling. The funds are delivered not directly through the utilities but through local social service agencies who work with those in need of funding for their heating, cooling and water bills. Click here to find out how to donate.

*Spire has a similar program called DollarHelp. You can donate here.

*Evergy is currently offering a free ecobee smart thermostat for enrolling in a program that allows the utility to adjust your thermostat settings remotely during times of high use throughout the region. There is a $50 charge for installation. You can find more on that limited time offer here.

*On the Missouri side, Evergy and Spire work jointly with low income families who are interested in an energy efficiency assessment. Its essentially a home walk-through that can also now be done virtually. There is no charge if you qualify. The home energy audit team will leave you with some energy efficiency materials such as low flow faucet aerators and LED light bulbs. Information can be found here.

*The U.S. Department of Energy has a list of all low-income weatherization and subsidy programs offered throughout the nation by state and county. That can be found here.

*In both Kansas and Missouri, the two utilities have a joint program with no income restrictions in which they connect you with a contractor to do a thorough evaluation of the home and install improvements such as insulation. The cost of the service must be paid by customers, but rebates are offered by the utilities to offset the cost. Contact the utility's customer service for more information.

Follow this link:
How to find where cold air is coming into your house and how to fix it - KCTV Kansas City

Regular air conditioners are known to be something of an energy hog, drinking power to cool down or heat up your house. So how could a solar air conditioner help?

A solar air conditioner is an air conditioner that runs off of its own dedicated solar panels, rather than one that's hooked up to a regular solar system or the main electricity grid. Effectively, it runs on its own self-contained circuit.

The solar air conditioner consists of three main components:

There are two points at which you may be able to save with a solar air conditioner:

Let's compare the costs of installing a 3.5kW solar air conditioner from Solar ACDC to installing a normal solar system and separate aircon unit.

Solar system + air con

Solar air conditioner

1. Estimates are from this calculator.2. Figure is from this site.

For this comparison, assume that you run your 3.5kW air conditioner for 4 hours every day during all 90 days of summer, keeping it set to 22 degrees Celsius3. Then, if energy from the grid costs 30c/kWh, running an air conditioner on mains power will cost you:

$0.25 (hourly cost of aircon) x 4 (hours per day) x 90 (days in summer) = $90

This means your solar aircon will save you about $90 in running costs annually, if you don't have to rely upon mains power. For larger air conditioners, this might stretch up to $200 annually.

With this in mind, the solar air conditioner will save you about $1,600 on install, and $100 - $200 yearly, for each year you run it. Heating has been excluded from this analysis, since it's most required in late afternoon or evening, after the sun has set and your solar air conditioner is inactive.

3. Calculations are based on this site.

While the solar air conditioner is great in concept, there are a few drawbacks to be aware of compared to just using an air conditioner with a normal solar system:

Solar ACDC claims that some elderly Australians may be able to cover the costs of solar air conditioner installation under the My Aged Care benefits scheme. This scheme is designed to give financial assistance to older Australians who need extra care or services to live safely and independently in their home.

However, Finder's analysis of the requirements for My Aged Care funding suggests that getting coverage for a solar air conditioner is unlikely at best, and you should check the scheme's requirements before making any financial decisions.

See the article here:
Solar air conditioners: How do they work and how much can I save? - finder.com.au

Fact.MR has announced the addition of the Insulation Blow-in Machine Market Estimated to Record Highest CAGR by 2028 " report to their offering

According to a recent Fact.MR study, worldwide sales of insulation blow-in machine closed in on nearly 30,000 units, and are estimated to register a Y-o-Y growth of 5.8% in 2019. The insulation blow-in machine industry growth has been underpinned by a wide range of trends, especially the growing demand for energy efficient insulation along with increasing adoption of HVAC systems in both residential and commercial sectors. In addition, demand for thermal and acoustic insulation in industrial buildings to improve cooling and heating systems continues to drive the growth ofinsulation blow-in machine market.

The study finds that rising popularity and adoption of insulation blow-in machine are remarkably influenced by its use of recycled waste materials such as fiberglass, cellulose, and rock wool that are environment positive, cheap, effective, easy to install, and have relatively high R-value. Further, opportunities are imminent in insulation blow-in machine market, as manufacturers continue to shift their focus towards portable products, amid rising home improvements and DIY activities for filling in attic spaces, wall cavities, and joist cavities.

To remain ahead of your competitors, request for a sample>>>>https://www.factmr.com/connectus/sample?flag=S&rep_id=560

Addition of chemicals in loose-fill insulation materials to provide fire resistance properties for specific industrial application such as in cookhouse will continue to provide potential growth prospects of the insulation blow-in machine market.

North America Lead Gains in Insulation Blow-in Machine Market

According to the study, North America is likely to retain its leading position in insulation blow-in machine market, representing sales of over 10,000 units in 2018. As old infrastructure gets worn out and prices of new construction rises, homeowners in the region are focusing on home improvement and renovation activities including blown-in insulation, thereby impacting the market growth. East Asia, on the other hand, has witnessed an exponential rise in the construction industry on the back of improving economic conditions, government initiatives in infrastructural development, and high disposable income. This, coupled with increasing installation of HVAC systems in urban areas will complement the expansion of insulation blow-in machine market in East Asia.

For critical insights on this market, request for Methodology here>>>>https://www.factmr.com/connectus/sample?flag=RM&rep_id=560

Cellulose Sales for Insulation Blow-in Machine Continue to Remain High

Cellulose has been growing in popularity as the most preferred material for blown-in insulation, as it provides green, efficient, non-toxic, and affordable thermal or acoustic insulation. Building and Construction Technology (BCT) of UMass Amherst declared cellulose insulation as a smart alternative to fiberglass, while the Cellulose Insulation Manufacturers Association (CIMA) claimed that insulating a house of 1500 square feet with cellulose will recycle as much as newspaper as an individual will utilize in 40 years. In 2018,

cellulose sales for insulation blow-in machine exceeded 18,000 units, accounting of nearly 60% volume share of insulation blow-in machine market. Although the demand for fiberglass blown-in insulation is also anticipated to witness significant growth, several health hazards along with stringent regulations set by OSHA and NAIMA regarding the use of fiberglass may negatively impact its sales growth.

The study opines that electric operation of insulation blow-in machine continues to gain increasing momentum, owing to its higher operational efficiency, durability, and no-emission, as compared to gas and diesel operations. Growing consumer inclination towards green insulation to lower environmental impact and improve energy conservation along with technological advancements will augment the segmental growth of insulation blow-in machine market.

For Comprehensive Insights Ask An Analyst Here>>>https://www.factmr.com/connectus/sample?flag=AE&rep_id=560

According to the study, demand for insulation blow-in machine will remain robust in residential sector, accounting for approximately 70% share in 2018. Ever-rising number of residents and buildings are likely to increase the need for insulation of both new and existing wall cavities and attics. In addition, numerous advantages of blown-in insulation in effectively decreasing the amount of sound transmission between walls and providing thermal insulation to improve energy savings will continue to push the demand of insulation blow-in machines.

The Fact.MR study also offers a long-term forecast of the insulation blow-in machine market for the period between 2018 and 2028. The insulation blow-in market is projected to exhibit a volume CAGR of 6.2% through 2028.

About Us:Fact.MR is a fast-growing market research firm that offers the most comprehensive suite of syndicated and customized market research reports. We believe transformative intelligence can educate and inspire businesses to make smarter decisions. We know the limitations of the one-size-fits-all approach; that's why we publish multi-industry global, regional, and country-specific research reports.

Contact UsFact.MRUnit No: AU-01-HGold Tower (AU)Plot No: JLT-PH1-I3AJumeirah Lakes Towers, DubaiUnited Arab EmiratesContact: +353-1-6111-593E-mail: sales@factmr.comWebsite : https://www.factmr.com

See the original post:
Insulation Blow-in Machine Market Estimated to Record Highest CAGR by 2028 - Industry Today

Staying home has led many homeowners to make those home improvement changes they had been putting off

by: Hanna Erdmann

WKBN

(WKBN) We were all staying home a lot more in 2020, and it looks like we will continue that trend through the beginning of 2021.

Staying home has led many homeowners to make those home improvement changes they had been putting off.

M.P. Vivo Heating and Cooling is a local company, here to fix and help maintain your heating and cooling units, so you have temperature control through all seasons.

Breathing in clean air is important, and owner Michael Vivo says the key is regularly changing your air filters.

One of the biggest problems we face on service calls is the filters. They are not being changed like the way they should be, said Vivo.

The company also offers indoor air quality services and products to keep all the harmful things in the air out of your home.

They can install a Fresh Air Ventilation System that adds humidity to the air and can ventilate inside to clear stale air and bring in fresh air.

In terms of routine maintenance, Vivo recommends getting your air conditioning unit and/or furnace checked every year, at least once, but twice is better.

They offer a maintenance package that provides easy access to service and keep your systems running longer. The maintenance contract includes system inspections and tune-ups, priority service, regularly scheduled visits and much more.

To find out more information, you can call (330) 259-0486 or visit the M.P. Vivo Heating and Air Conditioning website.

View post:
M.P. Vivo Heating and Cooling here to make sure your units works year-round - WKBN.com

Being an HVAC Contractor, like other professions, takes a lot of work. Its not something that can be accomplished overnight. It needs effort, time, dedication, hard work, and of course, skills. Since it is one of the most difficult industrial jobs, most professionals in this field are required to give their best and thats 100% of the time.

To be a step closer to your dream, you would need to possess a wide variety of skills. These skills are going to be essential tools for you to become a great and talented HVAC Contractor!

HVAC is a common term that most people are casually tossing around, but what does it really mean? It is an abbreviation that is short for Heating, Ventilation, and Air Conditioning. It pertains to the different systems that move air between outdoor and indoor areas. It is a climate control system that is installed in houses and commercial properties.

This system can keep you cool during scourging, hot summer days and keep you cozy during cold, chilly days. It filters indoor air and maintains the levels of humidity at comfort levels. These systems are there to keep you comfortable and safe.

Are you maybe someone whos considering a profession concerning the HVAC but still quite hesitating? As Bob Wells, creator of HVAC Training 101, once said, when making decisions, everyone should have access to unbiased information. Whether it is just buying a new air conditioner or deciding to become an HVAC professional.

If you are hesitating because its not the most in-demand profession, dont be! HVAC is a complicated system that not everyone can fix once broken. In those instances, HVAC professionals are definite heroes. They are the ones to be called on.

HVAC Contractor is one of the professions to consider. They specialize in the maintenance and installation of boilers, heat pumps, air conditioners, and furnaces. They also help people with matters of cooling, heating, air flow, and air quality.

The duties of an HVAC Contractor depends on the project they have on hand. For maintenance and inspection services, they would check the tube joints and pipes for leaks, testing electrical currents, clean air ducts, testing thermostat systems, and refilling refrigerant levels. Repair services, however, involve replacing certain parts. There are also installation processes where they hook up new units to pipes, tubes, ductwork, and distribution systems.

Seeing the extensive duties of an HVAC Contractor, it is no wonder that they would require a license. Theres the HVAC license and the more specific HVAC Contractor License. Remember that every country, and in some cases, state or city, has its own requirements for the license you are aiming for. Be sure to check that out.

Now, unto to the most important part. If you want to become an HVAC Contractor, you would need skills.

There are certain skills you will learn and possess when you train to be a good HVAC Contractor!

First off, as an HVAC Contractor, you must have business-building skills. Training will teach you that there are two particular ways to this; you can either learn or hire people who already have business skills. Then, it is a matter of maintaining your business afloat, which requires the proper skill.

Troubleshooting is a type of problem-solving. It means repairing and fixing failed or broken products and processes of a system or machine. Being an HVAC Contractor, you will undoubtedly receive service calls for repairing existing systems. This will require troubleshooting skills to employ critical thinking to determine the problems immediately.

To provide the best service, it is vital to have excellent communication skills. Being able to express and string together a comprehensive thought clearly in both writing and talking would come in handy when communicating with a customer. This skill would come in handy as it will be your job to educate your customers regarding the problems, maintenance, care, and solution of the HVAC.

In this line of work, you will encounter various software programs to monitor, control systems, and retrieve job assignments. There are also multiple computer tasks such as emails, reports, specifications, instructions, and instructions. Being knowledgeable about using a computer would help you tremendously.

Technical Skills are probably the basis and foundation of a successful career in contracting. Working in the field of HVAC would require extensive technical training and knowledge. Depending on the place you live in, you might need to pass a certain technical exam or course to prove your abilities before you can be a contractor.

Training would enable you to learn and know about control systems, design review, equipment sizing and selection, distribution system of air conditioning, steam heating, hot-water heating, and water cooling. It is also necessary to know about the installation and maintenance of HVAC systems.

It is necessary to review your financial statements every month or week. It is important to keep tabs and a close eye on your accounts. There are instances where companies would close down due to running out of liquidity. Training teaches how to keep track of the service revenue, gross profit, installation sales, new service agreements, average service call ticket, and labor as a percent of service and installation.

Knowing how HVAC works would surely come in handy to a contractor. As it will be your job to install and maintain, youll need to learn the system and the equipment itself. Knowing about the components would also help.

As technology is always advancing, it will be necessary to keep your skills up-to-date. Even after training, continue your education further to compete in the industry. You can take online courses, training courses, or read books.

Competing in the HVAC industry is tough and challenging. It requires work to keep up with the competition. While it is important to continue developing and polish your technical skills, there are other skills you will need to possess to be a good HVAC Contractor.

Read the original post:
8 Skills You Learn When You Train To Be A Heating Ventilation And Air Conditioning Contractor - E/The Environmental Magazine

Let the Sunshine In resounded as the anthem from the musical Hair when it debuted on Broadway in 1968.

In that year, photo-voltaic cells, now more commonly known as solar cells, were very expensive novelties. I bought one about 4 inches square for about $20 that could barely power a transistor radio.

Perhaps Bob Dylans song, The Times They Are A-Changin, or are a-chargin, is equally prophetic.

In mid-December, StraightUp Solar installed 23 solar panels on my roof, which on a good sunny day should generate almost 7.5 kilowatts.

StraightUp estimated that that should compensate for about 98 percent of our yearly electricity usage.

Of course, just like miles per gallon in a car, real-world numbers are tricky. We even asked our very artistic arborist, Gus, to carefully remove a tree limb that shaded some of the roof.

My solar quest started with a friend in Massachusetts boasting to me that he was going solar.

My next-door neighbor installed solar panels on his roof about three years ago, when it was more expensive than today.

People generate a lot of hot air discussing climate change. Most of us lack much individual control over greenhouse gas emissions.

Sure, you can drive a hybrid or electric car, which is not satisfactory for many people. You can install a highly efficient furnace and air conditioner while dialing down the heating and cooling in your home. Please dont lecture me about staying off airplanes. Some readers of this paper abhor wind turbines.

Installing solar panels for electricity is a major way you can fight climate change without sacrifice or disturbing your neighbors.

If you go solar for the financial benefits, youll wait about 10 years (it used to be 20 years) to amortize your investment.

There are three financial incentives.

The first is a 26 percent federal tax credit. Congress extended it through 2021. It was supposed to fall to

22 percent this year.

The second is selling solar renewable energy credits. Your solar installer will link you with a broker who buys the credits from you and sells them to major utilities that pollute too much, such as Commonwealth Edison.

Sometimes theres a market for energy credits and sometimes not. Timing is everything.

Then theres the slippery, controversial compensation known as net metering. This requires your utility company, such as Ameren, to buy the power from your solar panels at a wholesale rate and apply it toward your electric bill.

They will still charge you for delivery of power. So if your monthly electric bill is $100, you may see as much as an $80 discount, depending on your system and the utility.

Power companies detest this provision because it reduces their profits. Net metering is one of those political footballs that the Legislature deals with in the dead of night when no one is looking. Hello, Mike Madigan and Commonwealth Edison?

I barely have space left to tell you about my terrific experience with StraightUp (straightupsolar.com).

With that said, StraightUp supplies a lengthy contract that requires reading the fine print. Some clauses are negotiable, some are not.

The worst is the energy-credit contract from Carbon Solutions Group. Take this to your attorney. Ill explain more in a future column, where Ill also discuss the installation and first month of operation.

The 2021 virtual Consumer Electronics Show starts Monday. It baffles me how even the most sophisticated internet technology with an unlimited budget can substitute for the 140,000 people who take over most of Las Vegas every January.

Manufacturers will release their new products and technologies, but how do you appreciate the newest 100-inch 8K TV on a 24-inch HD computer screen? Or test drive the latest electric car?

Ill report on the most significant new developments from the forthcoming virtual CES in my Jan. 24 column.

Rich Warren, who lives in the Champaign area, is a longtime reviewer of consumer electronics. Email him at hifiguy@volo.net.

Read more:
Rich Warren | The times they are a-chargin' - Champaign/Urbana News-Gazette

#PreviewProduct1Emerson Sensi Touch Wi-Fi Smart Thermostat with Touchscreen Color Display, Works with Alexa, Energy... Check Price Now 2Smart Wifi Thermostats for Home - Programmable Thermostat that Works with Alexa Google Home IFTTT,... Check Price Now 3Google Nest Learning Thermostat - Programmable Smart Thermostat for Home - 3rd Generation Nest... Check Price Now 4Honeywell Home Wi-Fi 7-Day Programmable Thermostat (RTH6580WF), Requires C Wire, Works with Alexa Check Price Now 5Bosch BCC100 Connected Control Smart Phone Wi-Fi Thermostat - Works with Alexa - Touch Screen Check Price Now 6Bosch Thermotechnology BCC50 Wi-Fi Thermostat-Works with Alexa and Google Assistant, All-in-One,... Check Price Now 7Emerson Sensi Wi-Fi Smart Thermostat for Smart Home, Pro Version, Works with Alexa, Energy Star... Check Price Now 8iDevices IDEV0005AND5 FBA_2843481 Wi-Fi Smart Thermostat, Works with Alexa, White Check Price Now 9Vine Smart Wifi 7day/8period Programmable Thermostat Model TJ-225, Compatible with Alexa and Google... Check Price Now 10Honeywell TH9320WF5003 WiFi 9000 Color Touchscreen Thermostat, Works with Alexa, Needs 'C' Wire... Check Price Now 1. Smart Plug Amysen A Certified Compatible with Alexa, Echo & Google Home Only WiFi 2.4G (Z2 4 Pack)

Tech specialist. Social media guru. Evil problem solver. Total writer. Web enthusiast. Internet nerd. Passionate gamer. Twitter buff.

The rest is here:
Top 10 Best of Thermostats That Work With Alexas 2020 - Best gaming pro

Eliminate all your man-made belongings and you will soon realize that planet earth is quite a punishing place. Without your clothes, home, and cooling and heating, it would become a great challenge to handle the summer and winter seasons and the rains. Unlike other animals, the average human body is not built to withstand extreme climate conditions. Both extreme heat and cold can be lethal and our world is full of places that have these conditions. Talking a bit more about the latter, heres a quick look at some of the coldest places on earth.

Snag, Yukon Territory, Canada This village was earlier inhabited, but is currently abandoned. It also has a World War II era military airfield, which is now defunct. The origins of this village can be traced back to the Klondike Gold Rush. Snag has subarctic climate and the lowest recorded temperature was 81.4 F (63.0 C) in February 1947.

Yakutsk, Sakha Republic, Russia The capital city of Sakha Republic, Yakutsk is situated around 450 km from the south of Arctic Circle. It is the largest city to be located on continuous permafrost. Lowest recorded temperature was 83.9 F (64.4 C) and the highest was 101.1 F (+38.4 C). The city has an estimated population of more than 300,000. Yakutsk is a preferred location for tourists who want to experience extreme cold.

Oymyakon, Sakha Republic, Russia This rural locality remains frozen throughout most parts of the year. Due to the unique topography of the region, cold winds from the arctic get trapped, resulting in colder climate. Minimum recorded temperature was 89.9 F (67.7 C), making it the coldest inhabited place on earth. Oymyakon has a population of around 1000 residents. It gets its name from Oymyakon River that flows in the area and remains frozen during winters.

Verkhoyansk, Sakha Republic, Russia This town shares its cold record with that of Oymyakon. Verkhoyansk also holds the record for being the hottest place in the north of Arctic Circle. At 100.4 F (38.0 C), Verkhoyansk can be pretty hot in the summer months of June, July and August. These temperature differences make it a tough place to live. As per estimates, Verkhoyansk has a population of around 11k residents.

East Antarctic Plateau This is a frozen icy ridge located at an altitude of 12,467 feet (3,800 meters). Its apparent that no one lives here, even though scientists have visited this place to install a range of equipment including temperature sensors. Based on the readings, the minimum temperature was recorded at minus 148 degrees Fahrenheit (or -100 Celsius). This makes it the coldest place on the planet.

Original post:
Which Is The Coldest Place On Earth? - NewsPatrolling