Do you want to start installing ceiling tiles in a particular room in your home? Here, you can find plenty of DIY resources for learning how to install ceiling tiles. Only Decorative Ceiling Tiles is your one-stop shop for both advice and the very best in quality ceiling tile materials. We have tiles to match every budget and tiles that will give you a look that you have always wanted.

With our project calculator, you dont have to buy more materials than you will need. While we offer decorative ceiling tiles at great, affordable prices, we want you to feel like you are getting your moneys worth. Use our calculator and you can buy the perfect amount of tiles. We have the materials you will need to install a faux or real metal ceiling, and we also have expert advice to guide you along the way. If you already have a contractor in mind to do your ceiling tile installation project, then that is great! However, we can also help you to save money by doing some of this work yourself so that you can get the exact look you want.

When you shop in our online store, you do not need to worry about any special equipment to cut our tile. We will show you how to cut ceiling tiles using only a pair of scissors, and it only takes a few seconds to make those accurate cuts! We can even show you how to put up a ceiling in your commercial space so that it will look like it was put up by a team of professionals.

From the moment you buy our tiles to the time you start your installation project, we will show you everything you need to know to learn how to install ceiling tiles like a professional. We even offer samples of our tiles so that you can see the quality for yourself before making your final investment. We can teach you how to cut ceiling tiles so that you do not waste any product and so that you get the results you want.

Whether you glue, nail, or peel-and-stick your tiles to your ceiling, we want you to have the confidence you need to install ceiling tiles correctly. Browse our online resources and educate yourself on how to put up your own decorative ceiling, and then go to our store to get all of the supplies you need to make your dream ceiling a reality.

Read more:
How To Install Ceiling Tiles | Installation | Decorative ...

A photo of ceiling fan wiring and connections. Photo Credit: Timothy Thiele

In order to hang the ceiling fan, first connect the wires and then secure the ceiling fan housing. The ceiling fan housing has two slots on one side. Place these over the two clips on the fan support housing that is attached to the junction box. this will allow the fan to hang securely while you make the electrical connections.

Connect the white wires together (neutrals), the black wires together (the light feed), the green wires together (the ground), and the red wire to the fan connection wire (marked "fan" with a tag).

Use wire nuts to make these connections and then tuck these wires neatly in the area around the support bracket. Remember, the housing cover will need to cover these wires and none of the wires can be sticking out from under the cover. Once everything is connected, lift the fan and line the cover holes up with the bracket. Secure the cover with the screws provided and tighten snugly. This step may require an additional person to either hold the fan or insert and tighten the screws.

Read the original post:
How to Install Ceiling Fans Step 1 - About.com Home

Photo: motherearthnews.com

Installing a ceiling fan is a fantastic way to cut energy costs all year round. It helps circulate cool air in the warm summer months, but can also help push heated air back down in the winter, making the temperature feel warmer and allow you to dial down the thermostat. Its also the perfect weekend project for a homeowner, since you can accomplish the task in a few hours and enjoy the investment immediately.

Note: this project is designed for installing a ceiling fan where an overhead light fixture already exists. If additional wiring is necessary to install, consult an electrician. All wiring must follow local codes.

MATERIALS AND TOOLS Ceiling fan kit Ceiling outlet box (approved for ceiling fan) Expandable brace bar (if no access from above, easiest) or dimensional framing lumber (28) and screws Wire connectors, if not included Screwdriver Utility knife Keyhole saw Adjustable wrench Hex-driver or socket wrench Needlenose pliers Ladder or step ladder Safety glasses and dust mask

INSTRUCTIONS 1. When choosing a fan, note the size of your room. The blades need to be at least 18-24 from all walls, and be a minimum of 7 from the floor, and 10 from the ceiling. Choose a 36 fan if your room is less than 12 square, 42 if the room is between 144 and 256 square, and 52 if the room is more than 1515 square.

Photo: diyadvice.com

Choose a ceiling box approved for fans. Boxes for overhead lights are not strong enough to support the weight. Choose a metal box that can support the weight. If you have access from the attic above you can install the box to additional framing between joists. If not, grab a brace bar at the hardware store. This will screw into the joists, and the ceiling box and fan will hang from the newly added support.

2. Turn off the electricity at the breaker box, then carefully remove the old light fixture and its ceiling box with a screwdriver. Make sure the wiring is in good condition and consult an electrician to replace if necessary. Making sure the hole is between two ceiling joists, trace the outline of the ceiling box onto the ceiling and cut out the shape with a keyhole saw. It should be about 5diameter.

3. Following the instructions on the brace bar, position it perpendicular to ceiling joistsand twist the outer bar until it locks into the foot. Continue turning until the foot is fastened. Next, turn the inner bar to secure the other foot.

If youre not using a brace bar, measure the distance between the ceiling joists, and cut a piece of 2 8 framing lumber to span the distance, and secure with screws.

Link:
How to Install a Ceiling Fan - Bob Vila

Drop ceiling Installation Instructions

While drywall is the finish material most often found on the ceilings of homes, drop-in ceilings are usually the first choice of commercial contractors for professional offices, restaurants, and retail spaces. The drop-in system has also been a favorite of remodeling professionals for residential basements that dont have a ceiling already in place.

What are the advantages of dropped-ceiling installation that makes this choice popular with construction professionals? Unlike most other ceiling finishes, suspended-ceiling tile installation allows easy access to the area above the tiles so that small adjustments can be made without damaging the ceiling. Anyone with a few minutes to watch an online video or follow simple instructions can quickly learn how to install drop-ceiling tiles. Homeowners and repair professionals can simply lift out a few tiles, make the necessary repairs or changes, and drop the tiles back into the grid when finished.

A drop-in system also allows variable ceiling height so wiring, plumbing, and mechanical lines can run below the ceiling joists rather than through them. This system can eliminate or greatly reduce the amount of cutting and drilling necessary for installation or repair.

Finally, a drop-in ceiling can be used to complement a spaces interior dcor something that often isnt possible when using standard drywall without going to the time, trouble, and expense of custom paint or a textured finish.

Additionally, a drop-in ceiling system might be the best choice for your home renovation project if you live in an older house where the framing has settled over time. In this case, a drop-in system enables the installation of a level ceiling without a lot of costly framing corrections. It also allows you to cover the existing ceiling surface without expensive demolition and doesnt require new plywood to be installed on the joists as is needed for many nail-up tile applications. Shop around and compare prices and ceiling options. You will quickly see that there are many advantages to a drop-in ceiling. Once you are ready to buy your tiles, and especially if you plan on doing the remodeling work yourself, your biggest question might be whether a decorative drop-in ceiling tile installation is a DIY-friendly home project. The answer is a resounding, Yes! To learn how to install drop-ceiling tiles begin by watching the videos on this page. These videos along with these simple instructions should help you successfully complete your dropped-ceiling installation.

These are the tools and materials that youll need for your drop-in decorative ceiling tile installation:

While you may be anxious to start installing grid and tiles, theres a little prep work which must be done first:

You now have your prep work done and are ready to begin installing the grid system that will support the decorative ceiling tiles. If you did the prep work correctly, these steps should be quick and easy:

The rest is here:
How to Easily Install Drop Ceiling Tiles| Decorative ...

Star Ceiling Installation
We offer a complete service for creative lighting, from design concept through to final installation. Choose from our existing designs, or create your own. http://www.littlejohnproducts.com +44(0)1773...

By: Little John Lighting

Read the original here:
Star Ceiling Installation - Video

ADK Ceilings & Renovations PTY LTDinstall, repair, construct and renovate all types of ceilings, walls and outdoor extensions, including installations, ceiling repairs, and carpentry for residential and commercial projects. We are experts in project management, problem solving, and creative innovation and design solutions. As a renovation company we providing building solutions to residential homeowners, business proprietors and property developers. Interior and exterior projects include: Ceiling Cornice Wall partitions Shop fitting Carpentry Cladding Decking Patios Fencing From renovating small homes to large museums, manor houses and character homes, we offer building maintenance services on projects from small home repairs and maintenance through to large high-rise building repairs, in Melbourne. Working to your convenience, we endeavour to complete all projects on time, within budget and in a tidy fashion. We effortlessly handle large and small projects from the design phase through to completion. At ADK Ceilings & Renovations we firmly believe in customer satisfaction and place a high value on our work. Chat to us today for cladding, decking, carpentry and fencing from a company in Melbourne that is full of professionals who love what they do. Contact us today for further assistance.

See more here:
Ceiling, Wall & Carpentry Melbourne | ADK Ceilings ...

6 smart LED bulbs tested

More Stories in this Series

Now heres a truly genius idea: Take a Bluetooth speaker and embed it inside an LED light bulb. Screw it into any available socket and youve got an instant in-ceiling audio system that also lights up the room.

The Sengled Pulse in kit form ships with two bulbs, one denoted the master and the other a satellite. These are straight Bluetooth products, so your audio source will need to be fairly close to the master bulb to operate. The master bulb also relays music to the satellite via Bluetooth, so they will also need to be in range of each other.

You can add additional satellites to the mix as needed, but given the range limitations, I cant see a typical home supporting more than three or four bulbs total. (Alternately, you could configure separate Pulse setups in different parts of the house, but these wouldnt communicate with the others.)

Installation is ultra-simpleprovided you can find a suitable place to screw the bulbs in. Never mind the LIFX monster reviewed elsewhere in this roundup, the Pulse bulb is so large I had trouble finding a fixture it would fit into. Ultimately I installed the bulbs in in-ceiling canisters designed for PAR30-sized, floodlight-style bulbsand this is probably the intended idea. Smaller bulbs might not make sense anyway, as Im not sure theres much of a way to shrink the speaker elements down without severely compromising sound quality.

The oversized form factor is needed to accomodate the presence of the speaker, but it does limit where you can install the Pulse.

Each Pulse bulb provides 600 lumens of brightness and contains a 1.75-inch JBL loudspeaker driven by a 13-watt amplifier. These speakers wont fill a room with sound, especially when theyre mounted in the ceiling, but the quality of the sound is surprisingly good, with good clarity and a modest bass response.

You can use the audio features on the Sengled Pulse without a mobile app, but thats the only way to control the brightness of the lights. The app is simple, with just two primary functions: One lets you turn the speakers on and off and control their volume, the other controls the brightness of the bulbs. Note that color temperature cant be changedits locked at a nicely warm 2700K. Bulb brightness can also be individually controlled.

The app also gives you more fine-grained control over audio than youll get from simply using your phones media player. If you have have two speaker-lights, for example, you can set one as the left and one as the right channel, or you can have both speakers play both left and right channels. A rudimentary equalizer is also included if you want to fine-tune your music.

Original post:
Sengled Pulse review: You got your speaker in my lightbulb!

The New York Court of Appeals, the states highest court, ruled on two injury cases on April 2, examining whether the injuries in those cases fit within the scope of the states Labor Law 240, popularly known as the Scaffold Law. Under New Yorks Scaffold Law, property owners and contractors are liable for most gravity-related injuries to workers on construction sites.

One case involved a construction worker who was injured while installing insulation in the ceilings of a newly constructed apartment building development in the Village of Fredonia, New York, in 2006.

The court documents showed that the worker wore stilts that elevated his feet above the concrete floor in order for him to reach the 9- to 10-foot high ceiling. According to the plaintiff, the accident occurred when he stepped forward with one foot, while swinging a hammer tacker above his head to affix insulation between the ceiling rafters, and slipped on a thin patch of ice.

The testimony in the record varies with respect to how high the stilts elevated the plaintiff off the floor, according to court documents. The plaintiff claimed that the stilts raised him somewhere between 3 and 5 feet off the ground, while the plaintiffs supervisor testified that the stilts elevated the plaintiff by only about 18 inches. The plaintiffs coworker, who was performing the same task on stilts in the room with plaintiff, asserted that both he and the plaintiff had their stilts set at the lowest setting, which he stated was approximately 3 feet.

The testimony also differed on the circumstances leading up to the accident. The plaintiff testified at his deposition that, prior to falling, he was aware that ice and water had accumulated on parts of the floor, and he claimed to have so informed his supervisor. The plaintiff asserted that his supervisor instructed him to complete the installation despite the presence of ice. The supervisor, by contrast, testified that he not the plaintiff first noticed the ice, and that he directed the plaintiff not to insulate the ceiling above the icy area.

The high court ruled that the accident didnt fall within the scope of the Scaffold Law. The court also stated that regardless of the type of safety device involved, liability arises under Labor Law 240 (1) only where the plaintiffs injuries are the direct consequence of an elevation-related risk, and not a separate and ordinary tripping or slipping hazard.

Here, plaintiffs accident was plainly caused by a separate hazard ice unrelated to any elevation risk, the court stated. Plaintiff testified that stilts were the appropriate device for the type of work that he was undertaking, given the height of this particular ceiling. Plaintiffs testimony further established that it was the ice not a deficiency or inadequacy of the stilts that caused his fall.

Commenting on stilts, the court further stated that, unlike ladders, stilts are not placed in a stationary position and expected to remain still to ensure their proper and safe use. Rather, stilts are intended to function as extensions of, and move with, the worker during performance of the designated task.

Thus, the imposition of liability under section 240 (1) where a ladder slips due to an unsafe condition on the floor in the area where it is placed is distinguishable from the circumstances of plaintiffs accident here, the court stated. In sum, plaintiff cannot recover under Labor Law 240 (1) because his injuries resulted from a slip on ice, which under these facts is a separate hazard unrelated to the elevation risk that necessitated the provision of a safety device in the first instance.

However, in a dissenting opinion, Chief Judge Jonathan Lippman stated that he believes stilts placed on ice create the same elevation-related risk as do ladders and that he would hold that Labor Law 240 (1) applies in this case.

Read more from the original source:
New York Court Examines Scope of Scaffold Law in 2 Injury Cases

home > arts

The current exhibit from MFA candidates at CCAD, Tell All the Truth. But Tell It Slant, features 16 artists and showcases the diverse approaches in the program. The exhibit has a strong installation component, but there are also photography, fashion, design, video and mixed-media pieces.

Each of the rooms inside the Canzani Center Gallery teems with energy, and that energy is vastly different depending on the work presented. Some rooms are defined by installations asking for contemplation while others feature light and/or video components conveying a more ethereal setting.

Surely part of the reason the exhibit, which opened April 3, has such varied ideas and presentations are the backgrounds of the participating artists, who hail from Asia, Columbus and the Midwest, Canada and the United Kingdom.

A prime example of the exhibits multicultural component is Jill Raymundo, whose multi-piece installation is the first work visitors will see. She created an architectural model of the home she grew up in in Manila (using polystyrene foam), a Balikbayan box which translates to a person who returns home in Filipino engraved with images of that homes interior, and a massive print of a photograph of one of her ancestors paintings.

In the next room over, Rachel Layne Rushs layered self-portraits demand the viewers attention and feel almost like the antithesis of Amy Lewis floor installations that share the space. Rushs portraits (and vanity video component) are bizarre and powerful, while Lewis quietly mischievous metal box installation and mini screens with stop-motion animation feel almost hidden (and some actually are).

Another work that will immediately capture viewers attention is Jovanni Lunas ceiling-high installation. The pieces contains hundreds thousands? of rolled paint strips resting on tiny shelves. Even though the piece is about the laborious process of creating such a massive number of pieces and meticulously organizing them, the aesthetic is breathtaking.

Also make sure to wander into the video/animation/light installation rooms. Its an immersive experience that, despite each pieces restrained presentation, immediately pulls the viewer in. Erek Nass work using projected light and water is quietly discomforting.

Jesse Tigges photo

2015 The Dispatch Printing Company, reproduction prohibited. All Rights Reserved. For more information on this site, please read our Privacy Policy, About Our Ads and Terms of Service. It is the policy of The Dispatch Printing Company and Affiliated Companies to provide equal employment opportunity to all qualified individuals without regard to their race, color, religion, national origin, age, sex, martial status, disability, military status, citizenship or any other legally-protected status in accordance with applicable local, state and federal law.

See the article here:
Studio Proof: Tell All the Truth. But Tell It Slant showcases diverse approaches of CCAD program

Commercial air travel in and out of Powell River will be improved after a new guidance system is installed and the runway lengthened.

During the Thursday, April 2, City of Powell River Council meeting, Councillor Jim Palm said the two airport initiatives are an important item for the future of Powell River. The airport will be modernized with the installation of a GPS system, which will have a significant effect on the capacity for aircraft to land at Powell River airport when atmospheric conditions are less than ideal. Palm said the installation of the GPS system would lower the minimum ceiling height required for aircraft to land in Powell River during inclement weather.

Based on statistics from previous years, having the system in place would provide an additional 24 flights a year that would ordinarily be cancelled without the GPS system in place.

Palm said the city is also planning to apply for funding to lengthen the runway. The longer runway would provide for higher capacity on the passenger aircraft serving the community. Currently, because of runway length, commercial flights can only operate at 86 per cent capacity. The runway extension would allow aircraft to be filled to 91 per cent capacity, meaning 1,380 additional passengers a year could travel to Powell River.

According to a report from Tor Birtig, the citys director of infrastructure, the GPS approach will lower the ceiling height from 510 feet to 330 feet for commercial and helijet aircraft flying into the airport. This reduction will increase the reliability of the commercial carrier from 95 to 97 per cent, allowing an additional 24 flights, or 570 passengers per year, to land in Powell River during inclement weather, Birtig stated. To lower the ceiling height, there are many trees on private and city property that will require to be topped or removed. The cost for the tree removal is neutral as a result of the revenue expected from the sale of the trees.

Birtig said city staff has also investigated the costs associated with extending the runway. The proposed extension of the runway from 3,600 to 3,900 feet would have a capital cost of $320,000. An extension of the runway to 4,100 feet would increase the aircraft capacity to 96.5 per cent, or 2,750 additional passengers per year, with a capital cost of $2,115 million.

Peak Online requires a one-time registration before commenting on stories but it's quick and free. Once you've registered you can comment as often as you'd like. Comments need to be cleared by moderators, attempting to do so in a timely manner. So what are your 2 cents?! Sign me up now!

The rest is here:
Council sends aviation improvement beacon