Electrician – Washington State Department of Labor & Industries

To work in the electrical construction trade in Washington, you must have a valid electrician certificate issued by L&I.

The electrical construction trade includes, but is not limited to, installing and maintaining:

All electricians must meet the experience and training requirements to qualify for examination. There are two levels of certification for electricians: general journey-level and specialty electricians. Each has different qualification requirements.

A general journey level electrician (EL01) is certified to work in commercial/industrial and all specialty electrical categories.

In general, Oregon reciprocal licenses are available to those who obtained Washington (01) general journey level electrician certificates after completing 8000-hour Apprenticeships requiring at least 576 classroom hours of education and passing Washington exams. Anyone having a master (01) general journey level electrician certificate is also eligible. If this does not describe you, you are not eligible.

For Washington licensing verification, mail your Oregon Reciprocal License Verification Form along with a completed Request for Electrical Licensing Verification (F500-128-000) and fee of $27.90 to the address shown in the top left corner of the request form. We will fill out your verification form and mail it back to you. Mail is the only option, do not send anything by email or fax.

Washington reciprocal certificates are generally available to those electricians who obtained their Oregon general journeyman electrician (J) licenses after completing 8,000-hour Apprenticeships requiring at least 576 classroom hours of education and passing Oregon exams. Anyone having an Oregon General Supervising Electrician (S) license obtained by Oregon examination is also eligible.

If this describes you, and you have never held a Washington (01) general journey level electrician certificate before, or failed to pass an exam for one in the last two years, and you are not otherwise disqualified by conditions in WAC 296-46B-942(20), you are likely eligible.

For licensing verification from Oregon, submit Part C of the Washington reciprocal application to Oregon as follows:

By mail:

Department of Consumer and Business ServicesBuilding Codes DivisionPO Box 14470 Salem, OR 97309

By fax: 503-378-2322

Oregon charges no fee to process verification requests. Once completed, the original form will be returned by mail if you do not provide instructions requesting it be returned by fax and a fax number to send it to. Please direct questions about Oregon licensing verification to: license.bcd@oregon.gov.

No other reciprocal agreements exist.

There are 14 specialty categories in the electrical construction trade, each with a specific scope of work. Depending on the specialty, there are different experience and training requirements.

The following specialties require at least 4,000 hours of work experience in a selected specialty as an electrical trainee. Trainees must be supervised by an electrician certified in the same specialty or a by journey level electrician, be supervised a minimum of 75% of the time, and complete 48 hours of basic classroom instruction.

The following specialties require at least 2,000 hours of work experience in a selected specialty as an electrical trainee. Trainees must be supervised by an electrician certified in the same specialty or a by journey level electrician, be supervised 100% of the time, and complete 24 hours of basic classroom instruction.

Depending on the date you pass the examination and your birthdate, your initial certification will be good for a minimum of 25 months up to a maximum of 36 months for journey level or specialty electricians.

Learn how you may qualify see the flowchart on this form: Out-of-State Application for Electrical Examination (F626-009-000).

Determine where you fit best. If you are not a 01 general journey level candidate, see if specialty work scopes in Chapter 296-46B-920 WAC match your experience. Apply accordingly.

Include documentation with your application proving you meet the requirements for experience and education referenced in the flowchart.

Mail everything to the address on the form in a single envelope. Include the application fee see form. There are no online payment or submission options.

Do not email anything. Use our Verify tool to keep track of your status.

Before you apply, complete your hours of approved electrical basic trainee classes 96 for (01) exams, 48 for 4000 hour specialties.

Use our Verify tool to confirm that you have enough hours of work experience on record to qualify for examination. When you do, apply online.

If you are sending affidavits at the time of application, submit them along with an In-State Application for Electrical Examination (F626-001-000) form.

Mail everything to the address on the form in a single envelope. Include application fees see forms. Use certified mail if you want to track receipt. There are no online payment or submission options.

Do not email anything. Use our Verify tool to keep track of your status.

The road to examination for 2000 hour specialties requires documenting hours of work experience while supervised by an electrician 100 percent of the time.

Learn about experience requirements and how to qualify for examination: Application for a 0% Supervision Modified Electrical Training Certificate & Specialty Examination (F500-097-000).

Mail everything to the address on the form in a single envelope. Include the application fees see forms. There are no online payment or online submission options available.

After you pass your exam, we will send you a nonrenewable 0% supervision modified training certificate that allows you to work without supervision in the specialty you applied for until it expires.

Complete 24 hours of hours of approved electrical basic trainee classes. Submit an Application for a 2000 Hour Specialty Certificate (F500-098-000) when you have 2000 hours of experience.

After we record your hours, we will mail your certificate to you.

Do not email anything. Use our Verify tool to keep track of your status.

You must renew your electrician certificate every 3 years. It expires on your birthdate. Renewal fees double after expiration. Not renewable if expired more than 90 days; retest is your only option.

To change your address or renew online, you will need the following:

Fees are payable by credit/debit card or electronic check.

Before you renew, make sure you're eligible:

When not working in Washington, you can pay your renewal fee without completing education requirements. This places your certificate into inactive status until you meet education requirements or expire.

Having trouble? Contact us at ElectricalProgram@Lni.wa.gov. Please provide your certificate number and let us know what you are experiencing.

Mail a renewal letter to you that acts as your certificate for 30 days. Your card should arrive in about 30 days. Nothing will arrive if you do not have your address up to date.

Changing your address? Make sure to change it on every license or certificate you hold.

View post:
Electrician - Washington State Department of Labor & Industries