Best 25+ Siding installation ideas on Pinterest

13 Simple Vinyl Siding Installation Tips

Install Longer Panels First - When installing siding on each side of a window or door, start on the side that needs the longer panels. Longer siding panels don't stretch as readily as smaller ones, so they're not as easy to adjust if they get out of whack. Before nailing the last couple of pieces on the small side, measure up to the top of the window to make sure both sides are at the same height.

Installing Vinyl Siding in These 23 Steps

How to Install Vinyl Siding in 23 Steps - Tips on Vinyl Siding Installation

HardiePlank Lap Siding Install Video - YouTube

Installing Vinyl Siding in These 23 Steps

While vinyl siding is not for everyone, millions of American homeowners have decided that it's exactly right for them. The truth is, the price of a vinyl siding installation can be cut nearly in half if you're willing to do the work yourself.

13 Simple Vinyl Siding Installation Tips

Crimp and Caulk the Top Course

13 Simple Vinyl Siding Installation Tips

Installing or repairing vinyl siding on your house? A professional siding contractor shares tips to help you achieve great results.

How to Install Vinyl Siding in 8 Easy Steps | DoItYourself.com

13 Simple Vinyl Siding Repair and Installation Tips | The Family Handyman. Get the details right when you install vinyl siding and you'll save yourself hours of frustration later on. These 13 simple tips will help

13 Simple Vinyl Siding Installation Tips

There's no way to stop rainwater from getting into the J-channel that sits on the top of windows and doors. But you can stop that water from getting behind the side J-channels. Create a flap in the top J-channel that overlaps the side channels.

13 Simple Vinyl Siding Installation Tips

La superposicin de sus principales canales en J

Privacy

13a8423b7ecc9f59f5b92fab7d99567c

Original post:
Best 20+ Siding Installation ideas on Pinterest | Vinyl ...

Vinyl is a polymer formed during a chemical do-si-do between ethylene gas and chlorine, which produces a fine white powder called vinyl resin. When it's melted and mixed with different additives, the resulting compound can be as rigid as pipe, as supple as a shower curtain, or durable enough to survive the heavy foot traffic on a kitchen floor.

New, so-called virgin vinyl siding has a greater complement of the key additives that impart flexibility and resistance to UV degradation. Some manufacturers will tout their product as 100 percent virgin (along with a mention of its supposed superiority), but most siding is made with a core of remelted vinyl top-coated with virgin material.

Typically, vinyl siding is extruded through a die, but to produce the deepest patterns and crispest edges, panels must be molded from polypropylene, a more expensive plastic. Molded panels are typically no more than 4 feet long, while vinyl extrusions can be virtually any length.

Rap on a vinyl-sided wall with your knuckles, and it will flex and sound hollow. That's because, in most cases, only a relatively small area of a vinyl panel is actually resting against the sheathing.

A thin panel, or one without support, is more likely to sag over time. The thinnest siding that meets code is .035 inch thick. Premium siding can be .044 to .048 inch, and a few manufacturers sell .055-inch siding. The thicker sidings tend to be stiffer, and therefore more resistant to sagging, but stiffness depends on other characteristics as well.

Panels with a folded-over, doubled nailing hem and a relatively deep profile tend to be stiffer than others, as do those with narrow clapboards: The more bends the better. Although claims are made that thicker siding is also more impact resistant than thin siding, test results suggest that it has more to do with its chemical makeup, which, unfortunately, is not available to consumers who want to compare products.

Thinner, less-stiff sidings can also be sucked off a house when high winds blow. Reading the manufacturer's warranty should give you a good indication of the product's ability to handle heavy weather. Some even comply with the 146-miles-per-hour wind code in hurricane-prone Miami, Florida.

One siding, Wolverine Millennium, comes with a won't-blow-off warranty, and its literature states that it will withstand 180-mph winds, when nailed properly.

Read more here:
For the Love of Vinyl Siding | This Old House

1

Install horizontal siding, such as aluminum or vinyl by hanging the underlayment and installing the trim.

2

Add the corner posts, using two nails in the upper slots to suspend them. If you use more than one piece to complete a corner, be sure that there is an overlap of 1 inch (2.54cm).

3

Place the footer, which is the piece of trim that is at the bottom of each exterior wall, as starter strip of siding will slide into this.

4

Apply a strip of F-channel trim at the top of the exterior walls, under the eaves. The top sheets of siding will slide under this piece.

5

6

Proceed up the wall, interlocking the bottom of each sheet with the top of the previous sheets. Be sure to overlap successive panels by 1 inch (2.54cm).

7

Trim the siding panels using a circular saw to meet windows, doors, and corners. Use gutter-seal adhesive to finish the installation at window sills and eaves.

8

Install the top panel by trimming the unneeded portion from the top of the sheet. Lock it into place at the top of the preceding panel, and slide it under the F-channel.

9

Install vertical siding by first locating the mid-point of the wall.

10

Draw a vertically level line at this position using a straightedge.

11

Center the starter panel on that line and cut the strip 1/8 inch (0.3175cm) short, to allow for expansion. Hang this panel by placing a nail at the top of each nail strip, at about 8 inch (20.32cm) increments.

12

Cut the successive strips to rest on the footer, always allowing a 1/8 inch (0.3175cm) gap at the top. Moving from the center out, interlock each strip with the previous one, continuing to place the nails at 8 inch (20.32cm) increments.

13

Install a J-channel on the post when you reach a corner. Shim the J-channel at about 5/16 inch (0.794cm) to keep the post on the same plane as the other strips. The edges will insert between the J-channel and the outer flange of the post.

14

Add panels around the doors and windows in the same manner as in Step 6.

15

Proceed with the following steps for installing wood siding. The primary difference between this application and the others, is that the vertical corner boards will be installed last.

16

Install trim boards to surround windows and doors. Add metal flashing to control water flow.

17

Cut the boards to length, making sure that the joints meet over a stud. Make sure that each plank is cut square to avoid any gaps. Be sure to prime the sheets of siding on both sides and at the edges. Also, be sure to prime any exposed ends when panels are trimmed.

18

19

Complete installation adding the vertical boards at the corners, so that they are flush with the horizontal boards, but always allow at least 1/8 inch (0.3175cm) for expansion.

Originally posted here:
How to Install Exterior Siding - wikiHow

FORT ANN Residents of Fort Ann school district will vote in September on a nearly $3.7 million capital project to replace and reconstruct roofs, improve parking lots, relocate and upgrade the fitness room and create a new 21st Century Learning Center.

The school board on Friday approved setting a Sept. 19 referendum for the $3.69 million project. The polls will be open from noon to 8 p.m.

Much of the work was identified by Mosaic Associates Architects in the five-year building conditions survey it prepared for the district, which has about 475 students in kindergarten through 12th grade.

Big-ticket items include about $300,000 to repave and improve the main parking area and bus loop and $183,000 to improve drainage and pave the rear parking lot.

School officials also want to transform a classroom into what they are calling a 21st Century Learning Center, which would include a collaborative learning area, MakerSpace area where students can do hands-on projects, LED monitors, multiple whiteboards, reconfigurable furniture and storage and cabinets.

The project allocates $90,000 for a relocated fitness room, including space for yoga, a universal gym machine, treadmills, exercise bikes and a renovated bathroom.

Other projects include fixing water infiltration in the basement, replacing six electrical panels, replacing gym lighting and adding switching, upgrading the public address system, replacing hot water heaters, upgrading exit and emergency light systems and replacing gym doors and hardware and exterior doors.

The project also includes installation of a new auditorium sound system, reconstruction of the stage apron and air conditioning for the high school computer lab.

A number of upgrades would be made to the bus garage, including replacement of the roof, main furnace and air handling unit; installation of new siding and of a fuel tank leak detection monitor.

The district plans to tap $200,000 from fund balance. It would bond the remaining $3.49 million and receive state aid reimbursement of 76.1 percent.

School officials have said previously they have debt coming off the books that would be timed for this project. Superintendent Kevin Froats said there would be no additional tax impact from the project.

The capital project will protect the communitys long-term investment in its schools and bus garage, he said in an email.

People can apply for absentee ballots. Applications must be received by the district clerk at least seven days before the vote if the ballot is to be mailed to the voter on or prior to Sept. 18 if the ballot is to be delivered personally to the voter. Completed ballots must be returned to the clerk no later than 5 p.m. Sept. 19.

You can read Michael Goots blog, A Time to Learn, at http://www.poststar.com or his updates on Twitter @ps_education.

Continue reading here:
Fort Ann school officials want $3.7 million to improve site, upgrade facilities - Glens Falls Post-Star

Builder Magazine

James Hardie Introduces Luxury Siding Collection Builder Magazine ... http://www.aspyredesign.com, which provides building professionals with a look book of design ideas for the Reveal Panel System, for Artisan Siding products and for the Reveal system + Artisan products in combination, as well as product and installation ...

See the rest here:
James Hardie Introduces Luxury Siding Collection - Builder Magazine

CLADDING on tower blocks is being ripped down across Britain amid fears it could contribute towards another deadly Grenfell-like fire.

Councils across the country have been testing materials on their own buildings heres what you need to know about the controversial building decor dubbed asilent killer.

Eyevine

Cladding is a material which is wrapped around the outside of a building.

It is used to improve appearance and energy efficiency.

Colourful green and blue panels designed to improve insulation and soften the look of the brutalist concrete block were fitted to Grenfell Tower in Kensington, West London,as part of a 9million refurb completedin May 2017.

Dense foam boards coated in zinc rainproof sheets were spaced 30mm apart across the 24-storey building, which housed 120 flats and at least 500 residents.

Just two months before the Grenfell fireLondon Fire Brigadewarned all 33 councils in the capital about the risks of cladding on tower blocks.

The disastrous fire at the 24-storey block was started by a Hotpoint fridge freezer on the fourth floor.

Experts said the composite foam sandwich panels helped spread the fire quickly from the lower floors all the way up the block.

The material used in the cladding on Grenfell was the cheaper, more flammable version of the two available options, an investigation of the supply chain by The Guardian has claimed.

Fireproof cladding initially planned for Grenfell was reportedly downgraded so the council could save money.

Leaked emails seen by The Times reportedly show that Kensington and Chelsea Tenant Management Organisation (KCTMO), who managed the building on the councils behalf, saved 293,000 by downgrading the material used to clad the 1970s tower.

Arnold Tarling, 55, of the Association of Specialist Fire Protection, said the foam went up like matchsticks.

And he said the waterproof zinc coating made it even harder for firefighters to douse the blaze.

He added: The cladding looks lovely, its cheap, complies with regulations and gives the building a high environmental rating. But its a silent killer.

Witnesses to the blaze on June 14, which resulted in dozens of deaths,described how the material went up like paper.

It has now been claimed the deathtrap cladding is banned in America and a fireproof version could have cost just 5,000 more.

And the claddings manufacturers clearly state in its brochure that it should not be used on a building above a height of ten metres (32ft), according to the Express.

The number of deadly tower blocks with combustible cladding similar to Grenfell Tower is 208, according to the government.

All of those blocks tested so far have failed fire safety checks.

Five tower blocks in Camden were evacuated as emergency safety work was carried out by the council, following the Grenfell Tower blaze.

Cladding has been ripped from other towers in areas including Plymouth, Greater Manchester, Liverpool, Portsmouth and Sunderland.

Fears were also raised that the same flammable cladding used on Grenfell Tower could be attached to UK hospitals, schools and hotels.

Ryhl High School in Denbighshire was closed after the county council found cladding on the building was made by the same company who produced that used on the tower block in London.

Concerns were also raised about cladding on three Premier Inns in Maidenhead, Brentford and Tottenham, because they did not appear to comply with government guidance for tall buildings.

Cladding like that used onGrenfell Tower has also been found at up to 30 NHS trusts.

Communities secretary Sajid Javid has slammed the slow progress of some authorities and landlords and said ministers will force them to take action if they do not ensure flats are safe.

He also said he was considering naming and shaming those councils and housing associations who had failed to provide samples for testing.

The BBC has reported that 60 tower blocks have failed new tests carried on both cladding and insulation.

In depth tests checked the cladding in combination with the foam insulation used in Grenfell.

Shockingly, the death trap combination was found in at least 60 other blocks only nine, based in Salford, have been identified so far.

The Department for Communities and Local Government will publish its full findings of the whole system fire test on July 28, the BBC says.

Tests were conducted by theBuilding Research Establishment near Watford and involved setting a fire underneath a mock up of the insulation system used at Grenfell.

Salford had already begun removing cladding, and said they had already expected the nine towers to fail.

They were built in the 1960s and were re-clad recently with shiny panels and insulation to cut energy bills.

According to planning documents, sub-contractors Harley were paid 2.6million to oversee the cladding installation.

A spokesman for Harley Facades told The Sun they worked on the refurb and installation of exterior cladding.

They said: The Aluminium Composite Material (ACM) panels are a commonly used product in the refurbishment industry.

Harley Facades Limited do not manufacture these panels.

The renovation works at Grenfell Towers were reportedlyinspected 16 TIMESby Kensington and Chelsea council,whose chief executive has now resigned.

Originally posted here:
What is cladding, why was it used on Grenfell Tower and how many tower blocks have failed the latest fire tests? - The Sun

David made this announcement to a large audience in a meeting

Atlanta, Georgia, United States - 24 July, 2017 - Today, Atlanta Siding and Window Experts Company announced the introduction of new expert and quality products to their customers to ensure more peace of mind. In order to guarantee best quality services that will ensure satisfaction and the peace of the mind of customers.This company has collaborated with renowned and industrial leading manufacturers such as James Hardie Siding as well as Sunrise Windows. Also, they have employed enhanced expertise and professionalism in handling the installations of atlanta siding and windows at all levels.

Atlanta Siding and Windows Experts Company simply announced the new introduction in their line of services quality Sidings and atlanta windows. This introduction emanates from years of research, experience, and developments addressing the nagging issues of fear and lack of peace of mind of their customers. This company is optimistic that this new addition and introduction will bring about the needed solution to the perceived problem of people.

The chief consumer products of the company spokesperson speaking at the meeting said, This new introduction emanates from vigorous and extensive research into the customers biggest needs regarding enjoying peace of mind after installation of siding and windows. Truly, this new introduction will enhance the smiles on the faces of customers.

There were numerous consumer groups in attendance at the meeting, and all of them expressed their optimism as well as pleasure even as they hoped that this new introduction would positively affect the lives of people in Atlanta and other parts of the United States. One amongst the people in attendance expressed his gratitude and said The Atlanta Siding and Windows Experts has chosen to take up the challenge to provide answers to compelling issues regarding lack of confidence and peace of mind people are experiencing and provides a lasting solution. With a bit of luck, this new introduction and improvement will positively change the way people live.

The said event attracted the attention of famous people from different parts of Atlanta and other cities within Georgia. One of the participants said, This new introduction has truly lifted limitations in siding and windows installation and will not be wrong if said to bethe best thing that has ever happened to homeowners recently.

Those planning to become among the early users of this new introductions and products by Siding and Window Experts, they can simply visit the website http://atlantasiding.netd. Early usage of this new introduction will attract great rewards, discounts, and other offers.

The company Atlanta Siding and Window Experts is a leading company in the siding and window installation industry. This Company pridesitself on their craftsmanship, and even when they are sure that no issues will occur in their service, they still offer a 10-year warranty for their labor extra to the warranty offered by the material manufacturers. They are promising customers 15-years warranty on all their Siding and Window Installation services.

Contact Information of Atlanta Siding and Window Experts:

Media ContactCompany Name: Atlanta Siding and Window ExpertsContact Person: SupportEmail: info@atlantasiding.netPhone: (404) 464-5088Address:1778 Delaware Ave NE City: AtlantaState: GA 30307Country: United StatesWebsite: http://atlantasiding.net

See the article here:
CEO of Atlanta Siding and Window Experts, David Nelson Announces the Introduction of New Expert and Quality ... - Digital Journal

Anthony Plumbing, Heating and Cooling

Gary and Isaac were the techs who installed a complete HVAC system in my house. They were completely professional and really knew their stuff! They took the time to explain the whole process to me and answered every question that I had.I couldn't be happier with the job they did! I am so pleased with everything, from working with Mike the Comfort Advisor to Gary and Isaac's professional installation and caring attitude. I am already recommending Anthony to my friends and family, and it has only been two days! Thanks again for everything!

Lenexa, KSHVAC System Installation

5 out of 5

06/12/2017

Gary and Isaac were the techs who installed a complete HVAC system in my house. They were completely professional and really knew their stuff! They took the time to explain the whole process to me and answered every question that I had.I couldn't be happier with the job they did! I am so pleased with everything, from working with Mike the Comfort Advisor to Gary and Isaac's professional installation and caring attitude. I am already recommending Anthony to my friends and family, and it has only been two days! Thanks again for everything!

Lenexa, KSHVAC System Installation

5 out of 5

06/12/2017

Andrewcame out today to do our annual inspection service on our air conditioneras members of the ASAP plan. Such a polite and educating man! He taught me things about my air conditionerand air cleanerthat will help them both last longer. We will definitely be recommending Anthony to others!

Overland Park, KS ACTune-Up

5 out of 5

06/01/2017

I got a brand new water heater from the guys over at Anthony Plumbing, Heating & Cooling and it is working perfectly. I had been dragging my feet about getting a new water heater and then these guys had a deal that I could not pass up. They did the installation and the guys had my water off for about an hour which impressed me because I thought it was going to be a couple hours before they turned the water back on. There have been no issues whatsoever and I am so glad that I went with these guys.

Blue Springs, MOWater Heater Installation

5 out of 5

06/09/2017

Had my Anthony Clean Machine Air Filter installed today. Received a pre-appointment phone call and email with a bio of the technician who was installing it. Made me feel comfortable that my wife would be fine at home with him. There is not a more professional HVAC company in KC. Highly recommend!

Olathe, KSAnthony Clean Machine Installation

5 out of 5

06/07/2017

View original post here:
Anthony Plumbing Heating and Cooling | AC repair in Kansas ...

Last year on the first day of school, temperatures in parts of the San Fernando Valley topped a sweltering 100 degrees. And though all classrooms in Los Angeles Unified have air conditioning, many of those systems are several years past their life expectancy.

Now, the district is undertaking massive list of $342 million in bond-funded critical repair projects for heating and air conditioning, or HVAC, systems. Nearly a third of the total, about $107 million, will be spent in the San Fernando Valley, which often sees the hottest temperatures in the Los Angeles area.

We have 30,000 classrooms. All of them are air-conditioned, said Mark Hovatter, the LAUSDs chief facilities executive. Of those 30,000 classrooms, we get a lot of trouble calls.

On a recent weekday morning, Hovatters office already had received 776 calls for service, a third of them in the Valley, and it wasnt yet noon. A typical school day might see 200 such calls, but the number this day was higher as custodians cleaning classrooms in preparation for the start of school checked air-conditioning units. The plan is to check every classroom in the district before school starts, said Angelita Khazei, deputy director of maintenance and operations.

Most of the air conditioning that were getting trouble calls on now are for units that are in excess of 25 years old, when the average life of an air-conditioning system is 20 years, Hovatter said. So were already five, six, seven years beyond the expected useful life for a large number of the air-conditioning units.

The need to upgrade these systems has been growing, and the amount the district spends on overtime work for emergency fixes has been rising, too. In 2015, LAUSD spent about $400,000 on overtime for system repairs by district staff; that rose to $670,000 last year, Hovatter said.

Worse situations are when you have a major system that goes down, and lots of classrooms are out, Hovatter said. That obviously becomes our absolute highest priority. But we just have systems that are old, and they just break down. On hot days, theyve got to run continuously. They dont get a chance to rest, and they just wont hold up.

A resolution passed this month by the school board requires that every classroom has working air conditioning, or that those without are prioritized for work. The highest priority are systems that serve a lot of classrooms or are at elementary schools, Hovatter said, because younger students are more susceptible to the heat.

Advertisement

Times have changed. In the 1950s, air conditioning wasnt the standard in schools; now it is. Air-conditioned gyms used to be a luxury, Hovatter said. Now the district is working on making sure every district school has a gym that is air-conditioned (though some practice gyms dont have air conditioning). Gyms also are serving as backup classrooms when the AC goes out in regular classrooms on hot days, Hovatter said.

The list of projects is long, stretches across the district and will take time. The two largest projects are at Valley schools: a $17.2 million system at Richard E. Byrd Middle School in Sun Valley and a $12.5 million project at Van Nuys Elementary School, both slated to finish in 2021.

Some schools, like Byrd Middle School, need a complete new system. The last projects are expected to wrap up in 2022, but about three-fourths of the 67 schools on the list for repairs and new systems are scheduled to have the work done by the end of 2020. Projects at a dozen district schools have been completed, and projects at 26 schools are under construction now.

At Nestle Elementary School in Tarzana this week, Senior HVAC fitter Albert Del Toro and HVAC fitter William Van Lohn with the districts maintenance and operations division were making the final checks on a new system theyd recently installed in one of the classrooms. Del Toro closed the classroom door that led outside, and the temperature displayed on the thermostat steadily dropped.

We just have so much work going on right now, Del Toro said. Theres tons of units that were replacing.

Del Toro pointed up at the ceiling. This used to have ductwork that ran across. Its an eyesore, he said. Removing all that hardware had made the room more spacious and brighter. The new systems are much quieter and turn on with motion detectors rather than timers, he said, saving energy.

At Nestle, about 25 to 30 classrooms, plus other spaces like the library and offices, are set to get new HVAC units. Its a big project, and though some classrooms will be upgraded in time for the coming school year, the entire $3 million project wont be done until summer of 2020, according to the districts plans.

Air conditioning is one of our highest priorities, Hovatter said. Its not just unpleasant. Its, I cant teach today because I dont have air conditioning.

This story has been corrected to reflect that LAUSD has 30,000 classrooms, not 33,000 as the district had previously stated.

Original post:
As heat bakes Valley, LAUSD classrooms will cool off with $107M in upgrades - LA Daily News

When temperatures are rising and the air conditioner needs fixing or replacing, its best not to just call any old A/C company for help cooling down your home.

For a company you can trust will do the job right, call Stan Gelber and Sons Heating and Cooling, which won Best Air Conditioning Company on Long Island in the 2017 Best of Long Island competition.

Their trained technicians are experts in all things air conditioning and heating, including installations and repairs. Taking care of your heating and cooling units is the best way to keep your monthly costs low. For their trusted expertise on heating repair, A/C service, furnace installation, HVAC maintenance, and air conditioning repair, Long Islanders trust Stan Gelber and Sons Heating and Cooling!

To find all the other Best of Long Island contest winners, visit bestof.longislandpress.comNominations are now being accepted for the 2018 Best of Long Island program here.

Stan Gelber and SonsHeating and Cooling is located at 1079 Front St. in Uniondale. They can be reached at 516-538-0040 or gelber-sons.com

More:
Best of Long Island Spotlight: Top Air Conditioning Company - Long Island Press