On top Home Improvement Roof replacement 13
Roof replacement.

By: On Top Home Improvements, Inc

Here is the original post:
On top Home Improvement Roof replacement 13 - Video

On top Home Improvement Roof replacement 7
Roof replacement.

By: On Top Home Improvements, Inc

Read more:
On top Home Improvement Roof replacement 7 - Video

On top Home Improvement Roof replacement 15
Roof replacement.

By: On Top Home Improvements, Inc

Go here to read the rest:
On top Home Improvement Roof replacement 15 - Video

By Carlos E. Medina Correspondent

Three cars in the same area of the Marion Oaks community had windows damaged with what appeared to be a pellet gun sometime late Saturday or early Sunday.

The first incident was reported Sunday morning when a resident in the 17000 block of Southwest 39th Circle reported that the passenger side window of a 1997 Dodge pickup parked in his driveway had been peppered, leaving small holes. A small pellet was found on the ground near the truck, according to Marion County Sheriffs Office reports. The replacement cost of the window was estimated at $500.

Several hours later, a resident in the 17300 block of Southwest 44th Circle called the sheriffs office to report a similar incident involving a 1996 Honda Civic. The windshield and the drivers side window showed damage, including several small holes in the drivers side window. Replacement of the windows was estimated at $700.

Just after 6 p.m. Sunday a woman reported that the back windshield of her 2009 Dodge had several small holes in it. An officer spotted a pellet on the ground near the car, at a home in the 16900 block of Southwest 37th Terrace Road.

While officials were investigating, damage was discovered on another car at the home. A 2001 Toyota sedan had been shot at least 10 times, causing dents and knocking off paint chips on the front passenger side door, reports state.

We do believe that the cases are related due to the close proximity and the fact they all occurred on the same day. However, at this time we have no information that would lead us to who was responsible for the damage, said Capt. James Pogue, sheriffs office spokesman.

Anyone with information can call the Sheriffs Office at 732-9111 or Crime Stoppers at 368-STOP.

Excerpt from:
MCSO investigates damage to several vehicles

There are quite a lot of jobs which you can do around the home in order to aid t raise its market value, make it even cosier and enhance its curb charm. Replacement Windows Houston is one job that you will need to contemplate. Plus, you might have the ability to more efficiently modulate the interior temperature of the house for the relaxation of you as well as your loved ones, when you do this; you assist to raise the numerical value of your house as well. As this is something not done quite frequently, it is vital for you yourself to think about the alternatives that are offered when producing your Houston Windows replacement service. This is a guidebook that will assist to walk you through changing the windows in your home.

It surely is a fact that energy savings can be done, which is something that youre going to be in a position to quantify from the very first energy bill after changing your windows. It may also help to reduce the quantity of sound that enters in to your house from outdoors.

Comprehending the efficiency standings of the windows is essential when making your selection on Replacement Windows Houston. Youll discover that theyre rated in accordance with a u factor, which, in essence, enables you to understand just how much heat can be transmitted by the window. Theyll likewise have r-value, which permits you to discover just how much insulating material gains can be found using the window. Its also advisable to have a look at the SHGC amount (solar heat gain co-efficient). In the event you reside in a cold place, choose a high SHGC amount, as well as in a warm place, seek out an SHGC amount thats at the most 0.40.

You may also want to locate a professional Houston Windows installer thatll be in a position to look after the job for you personally. Oftentimes, theyll be in a position to greatly help walk you in getting through the consumer guide. A few of the bigger standard window organizations will certify their installers to allow you find and employ someone who is competent to look after your requirements professionally.

Additionally, there are many other, smaller choices that they be taken into consideration when buying windows for the house. They may contain several of the updates that are offered, like window tinting film, low e (electricity-efficient) finishing and a number of layouts that they be accessible.

Did you like this? Share it:

Read the original post:
A guide to Replacement Windows in Houston!

Burlingame, CA (PRWEB) February 10, 2014

Just in time for spring, new Therma Tru doors are now on display at Alexander Company window specialists in the San Francisco Bay Area. Stop in to Alexander Companys showroom in Burlingame to check out Therma Trus beautiful fiberglass doors.

Therma Trus fiberglass doors feature either a smooth or textured wood-like finish and can be installed for entryway or patio use. Seven new door panels and one beautiful hinged French door with venting sidelites are available from Therma Tru at Alexander Company.

Therma Tru doors are designed to look like wood doors, but perform like durable steel doors. Thats where their innovative fiberglass design comes into play for high quality, high performance and stylish doors. These doors are perfect for entry or patio use.

Alexander Company features a wide selection of beautiful windows and doors from top manufacturers like Therma Tru. Alexander Company offers free door and window estimates to help customers find the best possible price. Their showroom, located at 1322 Marsten Road in Burlingame, just off of Hwy 101, includes a huge selection of products and a professional staff that will answer any question and help customers find the best windows or doors to fit their needs.

For a look at some of the window and door options Alexander Company offers, check out their website at http://www.alexanderco.com. For more information or to speak with a consultant, call 650-373-3900.

About the company:
Since 1971, Alexander Company has provided residents and businesses of the peninsula and all of the San Francisco Bay Area with the very best in home windows and doors. As a family-owned and operated business, Alexander Company has provided the Bay Area with window replacement services, window repair, window installation, door installation and door replacement. They proudly carry the top window manufacturers in the country in the showroom in Burlingame. Give Alexander Company a call today to find out more about their exceptional line of windows and doors at (650)288-0297.

Read more from the original source:
Therma Tru Doors Now on Display at Alexander Company

Sarasota, FL (PRWEB) February 11, 2014

The 2014 New American home featured Element Building Company as the builder, Jeffery Berkus Architects as the architectural firm and Marc Michaels Interior Design Inc. The NAHB Leading Suppliers Council heads the showcase home. Vendors within the building industry come together to show their latest products and building techniques. This years home also features design concepts including multi-generational living, indoor-outdoor space, earth elemental tones, and energy efficiency.

As the NAHBs official show home, The New American Home is a symbol of energy efficiency and innovation. The home exhibits cutting-edge products from manufacturers all over the world.

TNAH 2014 is designed to exceed the requirements for certification to the Emerald level of the National Green Building Standard. Its energy-efficient features can be used in homes in a hot-dry climate at any price point with similar energy savings. The home is also certified Platinum under the United States Green Building Council (USGBC) LEED for Homes program, the EPA Energy Star program as well as the Indoor airPLUS program.

Two Trails, Inc. worked closely with NCHI to ensure energy efficiency and innovation in TNAH 2014. This home boasts a HERS Index of 22! It is expected to consume 78% less energy than if it were built to code (2009 IECC). At this level of energy efficiency, the home is designed to provide over $2,000 in annual energy savings to the homeowner.

The New American Home achieves a very high level of energy efficiency. The most noteworthy features of TNAH 2014 include the air tightness of its thermal shell and the use of solar energy. Under blower door testing, the thermal shell achieves 2.69 air changes at 50 Pa, an amount that is considered very airtight and keeps unwanted outdoor dry air from entering the home. Open-cell spray foam insulation is used on the inside of walls and underside of the roof deck, as well as around any penetrations, to prevent air leakage.

The home uses solar energy to power a portion of its electrical systems, space conditioning and hot water systems. The 16KW Photovoltaic (PV) system will provide approximately 83% of the annual energy needs for the home. A synchronized system of (4) Rannai natural gas-fueled tankless water heaters satisfies all of the hot water needs. The home also features both Natural Gas and Electric car charging stations in the Garage.

The systems-engineering approach unites segments of the building industry that have previously worked independently of one another.

The concept is simple: systems-engineering can make Americas homes cost effective to build or retrofit and energy efficient to live in. Energy consumption of new houses can be reduced by as much as 30% with little or no impact on the cost of construction. Similar performance can be achieved in existing homes.

To reach this goal, the Element Building team worked with their building partners to produce a home that incorporates energy and material saving strategies from design through construction. First, the team analyzed and selected cost-effective strategies for improving home performance. Next, the team evaluated design, business, and construction practices within individual partnerships to identify cost savings. Cost savings could then be reinvested to improve energy performance and product quality. For example, a design that incorporates new techniques for tightening the building envelope enabled Element Building to install smaller, less expensive heating and cooling systems. The savings generated in this process can then be reinvested in other high-performance features to further reduce energy use.

Originally posted here:
Two Trails Inc. Green Building Consultants for NAHB 2014 New American Home and the 2015 New American Home

From smartphones to smart cars, technology is transforming virtually every aspect of our busy lives. Technologies not only make life easier while on the go, but new options are quickly simplifying life at home as well. Home automation is proving to be a top home improvement trend, making the Jetsons futuristic lifestyle more realistic than ever before.

Some experts are predicting 2014 will be the year of the smart home, but what does that mean to the average homeowner? The term smart home refers to a house with technology and automated features for things like heating, lighting and electronic devices. Automation is becoming the new norm in three main areas of the home.

1. Energy management and environmental impact

A homes heating, cooling and electrical systems can be enhanced through home automation technologies. Boosting comfort levels, these technologies make it easier than ever to monitor energy and water usage, helping to reduce a familys environmental footprint as well as their energy bill.

Imagine turning your lights on remotely or adjusting the heat so your home is toasty warm by the time you return from work. Home management systems like the Iris Comfort and Control Kit let you access and adjust comfort controls from your smartphone, tablet or computer. Monitor and control lights or the thermostat from anywhere with Internet access, making it easy to save energy while away. You can even add water leak detectors to plumbing spaces within the home and receive an alert if the sensor comes in contact with water, helping you to react faster to reduce property damage and water waste.

2. Streamlining the kitchen and cooking processes

The kitchen is the heart of the home, so its no surprise that this area is getting a makeover thanks to technology enhancements. From basic motion-sensing faucets that eliminate the need for touching them with messy hands when cooking to appliances that think for you, the kitchen is a key component of a smart home.

For example, todays dishwashers clean faster and more efficiently than ever, thanks to technology that assesses soil levels and adjusts cleaning intensities. Ovens now come with sensors that evenly heat dishes, eliminating the need to rotate pans or use baking stones. Refrigerators even come with options that allow you to rapidly cool or freeze foods when they need to be brought down to a lower temperature quickly for food safety purposes.

3. Safety and security of a property

Security systems have never been more interactive, and new options are surprisingly affordable for homeowners looking to take the first step toward upgrading to a smart home. The Iris Safe and Secure Kit is an inexpensive option that includes motion sensors, a keypad, and door, window and cabinet sensors. A novice DIYer can install the entire system in about an hour.

See original here:
At Home: 3 ways smart technology is changing the home

Kitchen Layouts
Here #39;s essential information on Kitchen Layouts . We have the best resources for Kitchen Layouts . Check it out for yourself!

By: Kitchen Remodeling

Here is the original post:
Kitchen Layouts - Video

BUILDING PERMITS

PMT2013-05254 5318 Fifth St.; $1,275,000.00; Ridge Dakota; Markel Homes Construction Co; proposal to construct six-unit townhouses, each unit two stories over an unfinished basement. Each unit has an attached two-car garage. Please refer to TEC2012-00012

PMT2013-06108 2400 Meadow Ave; $1,000,000.00; new single-family dwelling residence to be two stories over basement totalling 7,353 square feet with a 825 square foot attached garage. Residence to include six baths, finished basement, and covered porch.

PMT2013-06303 1374 Glen Court; $200,000.00; William Fitzgerald; second story addition/remodel. Second floor 1,400 square feet., three bedrooms and two baths. First floor 1,776 square feet., kitchen, living, office, dining, playroom and bath. Scope of work also includes new garage, porch and deck.

PMT2013-06318 1310 Meadow Ave.; $100,000.00; Catherine Leuenberger; Habilis Designbuild; new detached garage and studio south of existing residence. Two-car garage to be 484 square feet. in size, studio to be 440 square feet in size with half bath. Foundation insulation and mid-roof inspections required.

PMT2013-06520 3333 Walnut St.; $11,296,193.99; Walnut 3333; Gerald H Phipps Inc; expansion of existing office building to be built to core and shell, existing building to remain as is. Scope of work includes all associated MEPs and sitework (including outdoor lighting). Please refer to TEC2013-00029, TEC2013-00030, and LUR2012-00049.

PMT2013-06812 767 Eighth St.; $60,000.00; Jane Baryames and Paul Baryames; CDC Development/Porchfront Hom; addition of 200 square feet to existing garage on single-story single-family dwelling. Includes associated electrical.

PMT2013-06850 1327 Spruce St.; $523,192.09; Spruce 1327; One Call Construction; tenant interior finish of existing professional offices on three floors to include associated mechanical, plumbing, and electrical work. Minor exterior finish renovation to include new vestibule, enclosed storage area, new front doors,modification to existing awnings, new mechanical screen and new bike rack.

PMT2013-06873 1035 Pearl St.; $718,996.95; End West; tenant remodel of existing 8,955 square feet of fifth floor for new offices. Space to include office and conference rooms as well as breakroom and bathrooms.

PMT2014-00090 1401 Walnut St.; $306,226.06; Walnut 1401; remodel interior basement core of existing five-story office building. Work to include new restrooms, new finishes and fixtures for elevator lobby, corridor areas, and core soffits plus demising walls for proposed office suites.

More here:
Real Estate: Boulder building permits Jan. 27-Feb. 2, 2014